Split n parts (14)

Not version-specific

Tekla Structures

Environment

Construsoft European

System component Split n parts (14) can be used to split multiple concrete or steel objects to multiple smaller parts at once.

Use for

Example	Description
Image	Splitting of three concrete walls.
Image	Splitting of three steel beams.

Before you start

Create objects to split.

Selection order

1. Open the component and adjust the settings.
2. Select the objects to split. Finish the objects selection using the middle mouse button.
The objects are split according the settings.

Picture tab

In the "Picture" tab, define the dividing direction and split lengths.

Option	Description
1	Define the seam length. Define the split dimensions and a number of individual split parts.
2	Join parts 2 3 to 1	Define, how the split parts of objects 2, 3, n should be connected to the split part of the object 1. Options: No By welding - for steel objects By cast unit - for concrete objects
	OPTION	Example:
	By welding	Image
	By cast unit	Image
	Define the division direction. (depending on location of start- and endpoint of the object). Options: Image

About tab

In the "About" tab, general information about the extension and the developer can be found.

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.