Place chamfer (m095)
Not version-specific
Tekla Structures
Environment
Construsoft European
Image
System component Place Chamfer (m095) can be used to place chamfers on plates. This component can be used also on top of plates generated by other components.
Objects created
- Create a plate first.
Use for
Place chamfers on plates.
Back to topBefore you start
Create plates in a model.
Back to topSelection order
1. Activate the tool.
2. Select a plate.
Back to topPart identification key
-
Parameters tab
Tab Parameters can be used to choose the type of chamfer to be used and it's values. Also the option to apply those setting on a selected filter can be defined. In case you want to apply the setting on selected part, there is a button to do so.
Image
| Option | Description | |||
|---|---|---|---|---|
| 1 | Option to choose which type of chamfer you want to use. The 4 options are: Image
|
|||
| 2 | Depending on the type choosen at point 1, you can define the value to be used here. Default value is the plate thickness. | |||
| 3 | Depending on the type choosen at point 1, you can define the value to be used here. Default value is the plate thickness. | |||
| 4 | In case you want to apply the tool on a selected group of parts, a filter can be choosen here. | |||
| 5 |
Selected part by a manual selection of using a filter? Using this button you can apply the tool on the selected parts in once. |
|||
In case direct modification is active, next picture will appear:
Image
Select the point/handle of the chamfer and next picture will appear:
Image
The content depends on the type of used chamfer and it's values. The chamfer can be modified. Please note: in case you run the tool again this "manual" change will be removed!
About tab
Information about the date of the tool. This date is indicative and may therefore differ even though the tool has the same content.
Image
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.