Phase copy tool (ML009)

Not version-specific

Tekla Structures

Environment

Construsoft European

System component Phase Copy Tool (ML009) can be used to export content of phasemanager or phasenumbers to be importer from another model into the current opended model.

Note: Only phase numbers are being importer\exported, so not parts or are are being copied.

Objects created

No objects are created.

Use for

Before you start

No specific actions required.

Phase Copy Tool tab

Tab Phase Copy Tool can be used for defining which phases should be imported or exported.

Option	Description
1	Press the button Get phases from current model, the in this model available phases will be showed: Image Save this setting by pressing the button "Save As", an XML-file will be stored in the attributes-folder of the model: Image Copy the XML-file into the attributes-folder of the the model in which you want to copy the phases. Open the model in which you want to copy the phases and load the XML-file. Select the XML-file in the option list and press Load: Image The phases of the XML-file will be shown. Image Press the button Apply phases to current model, the phases are going to be added into the model. Image

Option

Description

Press the button Get phases from current model, the in this model available phases will be showed:

Save this setting by pressing the button "Save As", an XML-file will be stored in the attributes-folder of the model:

Copy the XML-file into the attributes-folder of the the model in which you want to copy the phases.

Open the model in which you want to copy the phases and load the XML-file.

Select the XML-file in the option list and press Load:

The phases of the XML-file will be shown.

Press the button Apply phases to current model, the phases are going to be added into the model.

Create new phases tab

Tab Create new phases

Option	Description
1	Option 1 can be used to define which part so want to apply phases for. The options are: Selected. All.
2	Option 2 can be used to define on which part level you want to apply the phase. The options are: Part prefix. (Prefix part will be the phasename of the new phase) Assembly prefix. (Prefix assembly will be the phasename of the new phase)
3	Press this button to run the tool.

Option

Description

Option 1 can be used to define which part so want to apply phases for. The options are:

Selected.
All.

Option 2 can be used to define on which part level you want to apply the phase. The options are:

Part prefix. (Prefix part will be the phasename of the new phase)
Assembly prefix. (Prefix assembly will be the phasename of the new phase)

Press this button to run the tool.

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.