Metsec Non-Continuous Rail (106) - Bolts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Bolts tab in the Metsec Non-Continuous Rail Properties panel to override the default bolt data.
Image
| Option | Description | Default | Other |
|---|---|---|---|
| Bolt size (Dependant on Bolt standard selected) | This specifies the diameter in mm to be used for the bolts where the standard manufacturer's size is not to be used. If you choose the Default setting the bolt size will be 16mm. | The default is set to Default. | |
| Bolt standard (Multiple choices) | This sets the bolt standard of bolts to the secondary member in the joint. The Default setting is 8.8XOX. | The default is set to Default. | |
| Tolerance | This is the difference between the hole diameter and the bolt diameter in mm. | Up to and including 24mm bolts, tolerance will default to 2mm. Above that, the default will be 3mm. | |
| Thread in mat (Default, No, Yes) | This defines whether the thread may pass into the bolted parts or not when using bolts with a standard thread length. With full-threaded bolts this button has no meaning. If set to Default the setting is Yes. | The default is set to Yes. | |
| Bolt Type (Default, Site, Workshop) | This specifies the type of bolt to use. Workshop will bolt the two items together and they will become part of a single assembly. If set to Default the setting is Site. | The default is set to Site. |
See also
Metsec cold rolled - Important informationMetsec Non-Continuous Rail (106)
Metsec Non-Continuous Rail (106) - Parts tab
Metsec Non-Continuous Rail (106) - Parameters tab