Kingspan Horizontal Cladding Support Column (33) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the Kingspan Horizontal Cladding Support Column Properties panel to control how the connecting members are defined within Tekla Structures.
Image
| Option | Description | Default | Other | ||||
|---|---|---|---|---|---|---|---|
| Cladding Type (G140, L145070) | This specifies whether to use a g rail or channel profile. | The default is set to G140. | |||||
| Gauge (1.5mm, 2.0mm) | This specifies the thickness of the g rail or channel to be used. | The default setting is 2mm. | |||||
| Face Strut to the (Left, Right) | This controls the direction of the strut created. If this is set to Left then looking from the first rail selected to the second, the rail support will be orientated so that the strut faces to the left. The Right option similarly causes the rail support to face to the right. | The default is set to Right. |
| ||||
| General Bolt Grade | This sets the standard for all bolts added by the macro. | The default setting is 8.8XOX. | |||||
| Class | This sets the class that all parts will be included in. | The default setting is 99. |
See also
Kingspan cold rolled - Important informationKingspan Horizontal Cladding Support Column (33)
Kingspan Horizontal Cladding Support Column (33) - Parts tab