Kingspan Eaves Beam to Stanchion (27) - Parts tab

Not version-specific

Tekla Structures

Environment

Not environment-specific

Use the Parts tab in the Kingspan Eaves Beam to Stanchion Properties panel to control the member properties of the items created by the joint. By default this connection creates a single Kingspan item, changing any of the default profiles will result in the individual parts being seperate welded items.

Option	Description	Default	Other
Connecting Profile	This specifies a profile to be used for the centre portion of the fixing bracket. The profile will be positioned according to its type, ie. a channel or angle will be placed with its back aligned to the centre of the plates where as a rectangular hollow section would be placed centrally.	The default setting is L100758.
Stiffener	This specifies the stiffener profile to be used where the standard manufacturer's is not to be used.	The default profile will be determined appropriately from the model data.
Plate	This specifies the profile to be used for the plate where the standard manufacturer's plate is not to be used. The plate, and its associated data is defined in the data files. To override the plate use the t,b,h values featured below.	The default plate will be determined appropriately from the model data.
Plate, t	This sets the thickness of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.	The default setting is 10mm.	Image
Plate, b	This sets the width of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.	The default setting is 160mm.	Image
Plate, h	This sets the height of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.	The default height will be determined appropriately from the bolt data.	Image
Pos_No (Part position number)	The part position number consists of a prefix and a start number. 1. Prefix 2. Start number Some connections have a second row for the part position number where you can enter the assembly position number.	The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options. In addition to that it will use the values taken from the data files.	Image
Material	This is the material grade that will be used for the fitting bracket created in the joint.	The default value for this is taken from File menu --> Settings --> Options --> Components --> Part material.
Name	The profile name cannot be amended.

Kingspan Eaves Beam to Stanchion (27) - Parts tab

See also