Kingspan Autoform Two Sided (22) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the Kingspan Autoform Two Sided Properties panel to control how the autoform is defined within Tekla Structures.
Image
| No. | Option | Description | Default | Other | ||||
|---|---|---|---|---|---|---|---|---|
| 1 | Clearance | This specifies the distance from the face (web or flange) of the supporting member, to the end of the first secondary. | The default setting is 1mm. | Image
| ||||
| 2 | Top notch length | This sets the length of the top notch for the first secondary. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 11mm if connecting to the back of a Multichannel, or flange depth +11mm if connecting to the front of the channel. | Image
| ||||
| 3 | Top notch depth | This sets the depth of the top notch for the first secondary and determines the top location of the autoform return. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 25mm. | Image
| ||||
| 4 | Autoform return | This sets the return length of the autoform. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 50mm. | Image
| ||||
| 5 | Bottom notch depth | This sets the depth of the bottom notch for the first secondary and determines the top location of the autoform return. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 25mm. | Image
| ||||
| 6 | Bottom notch length | This sets the length of the bottom notch for the first secondary. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 11mm if connecting to the back of a Multichannel, or flange depth +11mm if connecting to the front of the channel. | Image
| ||||
| 7 | Clearance | This specifies the distance from the face (web or flange) of the supporting member, to the end of the second secondary. | The default setting is 1mm. | Image
| ||||
| 8 | Bottom notch length | This sets the length of the bottom notch for the second secondary. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 11mm if connecting to the back of a Multichannel, or flange depth +11mm if connecting to the front of the channel. | Image
| ||||
| 9 | Bottom notch depth | This sets the depth of the bottom notch for the second secondary and determines the top location of the autoform return. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 25mm. | Image
| ||||
| 10 | Top notch depth | This sets the depth of the top notch for the second secondary and determines the top location of the autoform return. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 25mm. | Image
| ||||
| 11 | Top notch length | This sets the length of the top notch for the second secondary. Notch data is applied to both parts of a compound Multichannel. NOTE: If specific values are entered then non standard Multichannel parts may be created. Speak to Kingspan to discuss options. | The default setting is 11mm if connecting to the back of a Multichannel, or flange depth +11mm if connecting to the front of the channel. | Image
| ||||
| 12 | Autoform (Reverse, Out, In) | This selects the type of autoform connection that is required. If the secondary member is compound then the connection will always be Autoform In. | The default is set to In. |
| ||||
| 13 | Bolt direction (In, Out, Off) | This sets the side of the autoform to which the bolts should be applied. If set to Off, no bolts will be applied. | The default is set to In. |
|
See also
Kingspan cold rolled - Important informationKingspan Autoform Two Sided (22)
Kingspan Autoform Two Sided (22) - Bolts tab