Kingspan Autoform One Sided (20) - Parts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parts tab in the Kingspan Autoform One Sided Properties panel to control the member properties of the items created by the joint.
Image
| Option | Description | Default | Other |
|---|---|---|---|
| Packing Profile | This specifies the packing plate profile to be used when countersunk bolts are selected. | The default profile will be determined appropriately from the model data. | |
| Packing Profile, t | This sets the thickness of the plate to the rafter / stanchion used with the rafter stays. | This value will come from the data files. | |
| Packing Profile, b | This sets the width of the plate to the rafter / stanchion used with the rafter stays. | This value will come from the data files. | Image
|
| Packing Profile, h | The height cannot be amended. | ||
| Assembly | This controls the assembly number for the packer plate. To override use the Pos_No values featured below. | ||
| Pos_No (Part position number) | The part position number consists of a prefix and a start number. 1. Prefix 2. Start number Some connections have a second row for the part position number where you can enter the assembly position number. | The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options. In addition to that it will use the values taken from the data files. | Image
|
| Material | This is the material grade that will be used for all the parts within the purlin / rail connection. | The default value for this is taken from ‘Setup Preferences: Joint part material’ | |
| Name | The profile name cannot be amended. |
See also
Kingspan cold rolled - Important informationKingspan Autoform One Sided (20)
Kingspan Autoform One Sided (20) - Parameters tab
Kingspan Autoform One Sided (20) - Bolts tab