1. Home
  2. Tekla Structures
  3. Kingspan Cleader Angle (13)

Kingspan Cleader Angle (13)

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

The Kingspan Cleader Angle connection is used to create a bolted connection between a manually modelled cleader angle and the top or outer flange of a Multibeam/Multichannel section.
 

Before and after

Image
tekla-structures-ks-13-before.png
 
Image
tekla-structures-ks-13-after.png

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • The cleader angle must be running on the same roof pitch as the rafters and Multibeam sections.
  • The cleader angle must be parallel to the column when used in a wall application, the cladding rails can be either Multibeam or Multichannel sections.
 

Selection order example

  1. One or more Multibeam/Multichannel
  2. Cleader angle
  3. Click middle mouse button
Image
tekla-structures-ks-13-selection-order.png

See also

Kingspan cold rolled - Important information
Kingspan Cleader Angle (13) - Parameters tab
Was this helpful?