I-Beam Reinforcement: Picture tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front view.
Image
Reinforcing bars
The user can select the reinforcing bars size for the longitudinal and U bars out of the rebar catalog.
The size is shown on the Picture tab page. The bending radius and the grade will be shown on the Attributes tab.
Cover thickness
On the picture tab page the user can enter the cover thickness for the top and bottom flange mesh and for the stem mesh.
The stem mesh has the same top cover thickness as the U bars.
The top longitudinal bars are placed between the U bars. They are defined on the U bars tab.
All longitudinal other bars are placed in the corner of the bend meshes.