ESSVE Purlin anchor

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

Pick main part and secondary part to apply the purlin anchor to the beams. The positioning regarding the rotation of the beams should be set to front or back.

Image
ESSVE_25.png

For more information:

Swe: http://catalog.se.toolstore.com/#/?menu=V70-1-%7CV70-1-117%7CV70-1-120
No: http://catalog.no.toolstore.com/#/?menu=V71-1-%7CV71-1-117%7CV71-1-120
Fi: http://catalog.fi.toolstore.com/#/?menu=V62-2-%7CV62-2-117%7CV62-2-120
Est: http://catalog.ee.toolstore.com/#/?menu=V73-2-%7CV73-2-117%7CV73-2-120

Settings for the purlin anchor

1. Select appropriate size of the purlin anchor by choosing right size in the drop down menu. All values are automatically loaded into the component.
Image
ESSVE_26.png

2. Each of the purlin anchors can be chosen to be created or not in the model.
3. Product code is generated from size and selections made.
4. No. of nails can be chosen for the specific component.
5. Under the pickorder tab a distance offset from the middle of the purlin anchors related to the upper side of the beam can be chosen
6. You can also select material from database etc under the prefix tab if you put the drop down menu for type to special.
Was this helpful?