DXF Export (ML184)
Not version-specific
Tekla Structures
Environment
Not environment-specific
Image
System component DXF Export (ML184) combines the extensions NC Files and DSTV to DXF Converter from Tekla Structures. And it can also generate a report csv file.
General tab
Image
| Option | Description |
|---|---|
| NC File setting | Choose what parameter setting of the NC Files *1 extension of Tekla Structures you use. Option:
|
| DSTV to DXF Converter setting | Choose what parameter setting of the DSTV to DXF Converter *2 extension of Tekla Structures you use. Option:
|
| Report for csv file | Choose what report to use to create a csv file, the template extension must have the extension .csv.rpt to show in this selection. You can also create your own report to use with this extension. |
| Use model subfolder | Fill out you’re subfolder within the model folder to use for the created files, if not filled out then the subfolder NC_dxf is used. |
| Use defined folder | Fill out a folder somewhere on your systems to use for the created files. |
| Open folder | Open the (sub)folder with the files in Explorer. |
| Complete path to dxf file | With this parameter, control when there is a field that contains .dxf, the value of the field is completed with the path definition chosen in one of the folder parameters. |
About tab
Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.
Image
*1 NC files
The extension NC Files is included within Tekla Structures and can be found in the "Menu" in the "Export" tab.
Image
Image
There is already a predefined setting for the extension DXF Export ML184 in the NC Files, this setting is defined to correctly export contour plates to dxf files for use on machines.
For assistance with this extension we advise that you use the help documentation of this extension by pressing F1 when on the form of this extension.
*2 DSTV to DXF Converter
This extension can be found in Applications and Components.
Image
Image
There is already a predefined setting for the extension DXF Export ML184 in the DSTV to DXF Converter, this setting is defined to correctly export contour plates to dxf files for use on machines.
For assistance with this extension we advise that you use the help documentation of this extension by pressing F1 when on the form of this extension.
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.