Cut back
Not version-specific
Tekla Structures
Environment
Construsoft European
Image
Custom component Cutback can be used to create a cutback. This cutback is a negative volume with the values needed and will be useful to customers doing cladding.
Back to topObjects created
Negative volume is created.
Back to topUse for
To model a cutback.
Back to topBefore you start
Create a cladding profile in the model.
Back to topSelection order
Click on the plate and a point.
Back to topPart identification key
Cut back
Parameters tab
Tab Parameters can be used to define the values of the cut back volume.
Image
| Description | ||
|---|---|---|
| 1 | The depth of the cutback, so in the longitudinal direction of the profile. |
Image
|
| 2 | This offset can be used to move the cutback in perpendicular direction of the profile. | See picture point 1. |
| 3 | Looking from the gutter to the panel: is the overlap on the left or on the right side. In case this option is not needed, "None" can be used.
Image
|
Image
1. Left |
A report called "Cutback" is available, but there is also a report available for users without the Tekla Structures numbering option, called "Cutback without numbering".
Image
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.