Terras (85)
Not version-specific
Tekla Structures
Environment
Not environment-specific
Image
System component Terras (85) can be used to create a terrace.
Back to topObjects created
- Terrace
Use for
| Situation | Description |
|---|---|
Image
| Rectangular shaped terrace with edges with different heights. |
Image
| Irregularly shaped terrace without edges with one curved side. |
Image
| Irregular shaped terrace with edges. |
Before you start
1. Open the component dialog window.
2. Set the demanded shape of the terrace using the combo boxes in the middle (see option 2 in the "Picture" tab)
Selection order
According to the shape set in the "Picture" tab, pick 9 points on the grid (If fewer points are required, place the remaining points on the last selected position of the shape).
| Settings | Example | |
|---|---|---|
Image
| Image
| |
Image
| Image
| |
Picture tab
In the "Picture" tab, define the shape of the terrace, the offset from the plane of creation and the dimensions of the edges.
Image
| Option | Description | |
|---|---|---|
| 1 | Define the offset from the plane of creation. | |
| 2 | Selecting from the options in the combo boxes, choose the demanded shape of the terrace. According to the selected shape, pick the points on the grid. The number of point is displayed on the options in combo boxes. Options: Image
When the upper side is rounded (two last options), enter the number of segments that will create the rounded side.
Define the offset from the line of creation.
Define the width of the edges for each side individually using the appropriate fields in option 5. | |
| 3 | Choose, whether the terrace should have drainage channels and select one of the following options. Options: Image
Define the dimensions the height and the angles of the edges a and d, the thickness of the terrace and the height of the edges using the appropriate fields in option 5. | |
4
| Choose the depth according to the plane of creation. Options: Image
Define the dimensions the height and the angles of the edges b and c using the appropriate fields in option 5.
| |
| Connection type | Choose the connection type. Options:
| |
| 5 | Use the appropriate fields for entering the dimensions. | |
Parts tab
In the "Parts" tab, define the position, number, material, name, class, and comment of the individual parts.
Image
| Option | Description | |
|---|---|---|
| Cast unit | Choose the type of cast unit. Options:
| |
Borders tab
In the "Borders" tab, define the borders of the edges from the corners.
Image
| Option | Description | |
|---|---|---|
| 1 | Define the borders of the top edges. Decide, whether the edge should be created. Options:
| |
| 2 | Define the borders of the bottom edges. Decide, whether the edge should be created. Options:
| |
About tab
In the "About" tab, general information about the extension and the developer can be found.
Image
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.