Concrete panel (28)
Environment
Construsoft European
Image
System component Concrete panel (28) can be used to add a prefab concrete panel profile to the profile catalog. Several dimensions of the panels’ cross section can be defined: thickness (width), height, chamfers, tapered tooth and -groove.
Objects created
- Panel profile
Use for
| Situation | Description |
|---|---|
Image
| Concrete panel will be added to the profile catalog. |
Before you start
-
Back to topSelection order
- Activate the component.
- Select two points.
Part identification key
Image
| Part | |
|---|---|
| 1 | Panel profile |
Picture tab
Tab Picture can be used to define the dimensions of the panel.
Image
Parameters tab
Tab Parameters can be used to define the properties of the new profile: names, weights, cross section area and reference point.
Image
| Option | Description |
|---|---|
| 1 | Name of the cross section in the profile catalog. |
| 2 | Name of the profile in the profile catalog and this is also the name used in Tekla Structures which will used in templates and reports, but also in IFC. |
| 3 | Define the location of the profile catalog. The options are: • Model directory. • Global directory. • Do not save. |
| 4 | Define the weight per m3. |
| 5 | Define the weight per meter. |
| 6 | Define the cross section area in mm2. |
| 7 | Reference point of the profile. The options are: Image
Reference point based on boundary. Image
Reference point based on box. |
About tab
Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.
Image
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.
Back to top