CMF Non-Standard Anti-Sag (57) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the CMF Non-Standard Anti-Sag Properties panel to control how the connecting members are defined within Tekla Structures.
Image
| Option | Description | Default | Other | ||||
|---|---|---|---|---|---|---|---|
| Direction of Spring Fixes (Top -> Bottom, Bottom -> Top) | This defines how the spring fixes are fitted. For example, going up the roof Top-> Bottom would cause them to be fitted at the top hole of the first purlin and to the bottom hole of the second purlin. | The default is set to Top -> Bottom. | |||||
| Face Strut to the (Right, Left) | This controls the direction of the strut created. If this is set to Left then looking from the first purlin selected to the second the anti-sag bar will be orientated so that the strut faces to the left. The Right option similarly causes the anti-sag bar to face to the right. | The default is set to Right. |
| ||||
| Type of Anti Sag (Anti Sag Ties, Angle Brace, Threaded Rod) | This specifies the type of connecting member to be used for the anti sag where the standard manufacturer's is not to be used. | The default is set to Anti Sag Ties. | |||||
| Rule Type (Standard, Barrelled) | If Standard rule type is selected more restrictive checks will be used to ensure the purlins are aligned correctly. | The default is set to Standard. | |||||
| General Bolt Grade | This sets the standard for all bolts added by the macro. | The default setting is 8.8XOX. | |||||
| Group | This defines the class that all parts will be included in. | The default setting is 99. |
See also
CMF cold rolled - Important informationCMF Non-Standard Anti-Sag (57)
CMF Non-Standard Anti-Sag (57) - Parts tab