CMF Non-Standard Side Rail (52) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the CMF Non-Standard Side Rail Properties panel to control how the connecting members are defined within Tekla Structures.
Image
| Option | Description | Default | Other | ||||
|---|---|---|---|---|---|---|---|
| Face Strut to the (Right, Left) | This controls the direction of the strut created. If this is set to Left then looking from the first rail selected to the second, the rail support will be orientated so that the strut faces to the left. The Right option similarly causes the rail support to face to the right. | The default is set to Right. |
| ||||
| Top Cleat Bolt Grade | This sets the bolt standard for the strut connecting to the first rail. | The default setting is 8.8XOX. | |||||
| Bottom Cleat Bolt Grade | This sets the bolt standard for the strut connecting to the second rail. | The default setting is 8.8XOX. | |||||
| Eaves Beam Web Bolt Grade | This sets the standard for bolts placed to the web of the eaves beam if the stiffener is to be included by the macro. | The default setting is 8.8XOX. | |||||
| Group | This sets the class that all parts will be included in. | The default setting is 99. |
See also
CMF cold rolled - Important informationCMF Non-Standard Side Rail (52)
CMF Non-Standard Side Rail (52) - Parts tab