CMF Non-Standard Horizontal Cladding Support (34) - Parts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parts tab in the CMF Non-Standard Horizontal Cladding Support Properties panel to control the member properties of the items created by the macro.
Image
| Option | Description | Default | Other |
|---|---|---|---|
| Part | This controls the part postion number for the parts created by this connection. To override use the Pos_No values featured below. | The default setting is MT. | |
| Assembly | This controls the assembly number for the parts created by this connection. To override use the Pos_No values featured below. | The default setting is CR. | |
| Options t, b, h | The thickness, width and height are not used. | ||
| Pos_No | The part position number consists of a prefix and a start number. 1. Prefix 2. Start number Some connections have a second row for the part position number where you can enter the assembly position number. | The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options. | Image
|
| Material | This is the material grade that will be used for all the parts added by this macro. | The default value for this is taken from ‘Settings > Options > Components > Part material:’ | |
| Name | The profile name cannot be amended. |
See also
CMF cold rolled - Important informationCMF Non-Standard Horizontal Cladding Support (34)
CMF Non-Standard Horizontal Cladding Support (34) - Parameters tab