BW Side Rail Supports (51) - Parts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parts tab in the BW Industries' Side Rail Supports Properties panel to control the member properties of the items created by the macro.
Image
| Option | Description | Default | Other |
|---|---|---|---|
| Rigid Strut Assm | This specifies the assembly to be used for side rail struts created by this macro. To override use the Pos_No values featured below. | ||
| Side Rail Hanger Assm | This specifies the assembly to be used for the side rail to eave beam strut. To override use the Pos_No values featured below. | ||
| Sag Bar Assm | This currently has no effect. | ||
| Diagonal Tie Assm | This specifies the assembly to be used for the diagonal tie wires. To override use the Pos_No values featured below. | ||
| Options t, b, h | The thickness, width and height are not used. | ||
| Pos_No | The part position number consists of a prefix and a start number. 1. Prefix 2. Start number Some connections have a second row for the part position number where you can enter the assembly position number. | The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options. In addition to that it will use the values taken from the data files. | Image
|
| Material | This is the material grade that will be used for all the parts added by this macro. | The default value for this is taken from ‘Setup Preferences: Joint part material’ | |
| Name | The profile name cannot be amended. |
See also
BW cold rolled - Important informationBW Side Rail Supports (51)
BW Side Rail Supports (51) - Parameters tab