BW Mezzanine Floor Connection (139) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the BW Industries' Mezzanine Floor Connection Properties panel to control how the connecting members are defined within Tekla Structures.
Image
| Option | Description | Default | Other | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Free dist Primary to L Profile | This is used to specify the clearance between the cleats defined in the joint and the primary member. | If no value is entered here then the clearance will default to 0. | Image
| ||||||
| Secondary member cut back | This determines the position to which the end of the secondary members are fitted, measured from the web of the primary member. | The default will give a minimum clearance of 5mm from the primary. | Image
| ||||||
| Place Cleats on (Left, Right, Both) | This specifies the positions where cleats are to be applied. The position is determined relative to the first secondary that is picked, looking along the secondary and into the joint. | The default is set to Left. |
| ||||||
| MIC Cleat Thickness (3mm, 4mm, 5mm) | This specifies the thickness of the standard cleat. | The default setting is 3mm. |
See also
BW cold rolled - Important informationBW Mezzanine Floor Connection (139)
BW Mezzanine Floor Connection (139) - Parts tab
BW Mezzanine Floor Connection (139) - Bolts tab