1. Home
  2. Tekla Structures
  3. BW Mezzanine Floor Connection (139)

BW Mezzanine Floor Connection (139)

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

The BW Industries' Mezzanine Floor Connection connects between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections. It is possible to specify any angle profile for the cleat, this allows it to be tailored to design requirements.
 

Before and after

Image
tekla-structures-bw-139-before.png
 
Image
tekla-structures-bw-139-after.png

 

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • Secondary members must be perpendicular to the primary member.
  • This connection should be used to connect floor beams created using the BW Mezzanine Floor Tool, download the tool from Tekla Warehouse.

Selection order example

  1. Continuous member
  2. Non-continuous member
Image
tekla-structures-bw-139-selection-order.png

See also

BW cold rolled - Important information
BW Mezzanine Floor Connection (139) - Parts tab
BW Mezzanine Floor Connection (139) - Parameters tab
BW Mezzanine Floor Connection (139) - Bolts tab
Was this helpful?