1. Home
  2. Tekla Structures
  3. BW Cold Rolled Cleat (133)

BW Cold Rolled Cleat (133)

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

The BW Industries' Cold Rolled Cleat joint connects between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections. It is possible to specify any angle profile for the cleat, this allows it to be tailored to design requirements.
 

Before and after

Image
tekla-structures-bw-133-before-02.png
 
Image
tekla-structures-bw-133-after-02.png

Image
tekla-structures-bw-133-before.png
Image
tekla-structures-bw-133-after.png

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • Secondary members must be perpendicular to the primary member.
  • Connections with two secondaries require them both to have the same orientation. 

Selection order example

  1. Continuous member
  2. Non-continuous member
  3. Click middle mouse button
Image
tekla-structures-bw-133-selection-order.png

See also

BW cold rolled - Important information
BW Cold Rolled Cleat (133) - Parts tab
BW Cold Rolled Cleat (133) - Parameters tab
BW Cold Rolled Cleat (133) - Bolts tab
Was this helpful?