Ayrshire Cold Rolled Cleat (115) - Parts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parts tab in the Ayrshire Cold Rolled Cleat Properties panel to control the member properties of the items created by the joint.
Image
| Option | Description | Default | Other |
|---|---|---|---|
| Cleat Profile | This specifies a cleat to be used for the connection. | If no profile is entered here the default trimmer cleat for the secondary member will be used. If no profile is given and a suitable default does not exist then the joint will fail. | |
| Packing Profile | This is used to specify a plate for countersunk bolts. | The default plate profile is 6mm thick. The default width will be determined appropriately from the rail profile. | |
| Pos_No (Part position number) | The part position number consists of a prefix and a start number. 1. Prefix 2. Start number Some connections have a second row for the part position number where you can enter the assembly position number. | The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options. In addition to that it will use the values taken from the data files. | Image
|
| Material | This is the material grade that will be used for all the plates and web cleats. | The default value for this is taken from `Setup Preferences Joint part material` | |
| Name | The profile name cannot be amended. |
See also
Ayrshire cold rolled - Important informationAyrshire Cold Rolled Cleat (115)
Ayrshire Cold Rolled Cleat (115) - Parameters tab
Ayrshire Cold Rolled Cleat (115) - Bolts tab