Ayrshire Non-Continuous Rail (106)

Not version-specific

Tekla Structures

Environment

Not environment-specific

The Ayrshire Non-Continuous Rail System joint is normally used when the specified column face to cladding distance is less than that possible for the standard purlin/rail joint. The joint can handle flush or recessed sheeting lines. A non-standard cleat, (either angle or tee), is welded to the column, and bolted to the rail using holes along the standard gauge lines.

Before and after

Notes

Any modification of the selected parts will cause this joint to be updated.
If specific values are entered under the Bolts tab, thus overriding the default bolt positions then non standard parts may be created.

Selection order example

Column
Rail

Ayrshire Non-Continuous Rail (106)

Before and after

Notes

Selection order example

See also