Area Reinforcement: Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and class.
Image
Properties
| Property | Description |
|---|---|
| Create mesh Select which meshes are created: | • Both sides • Front side • Back side |
| Prefix | Define the prefix for the meshes. |
| Use cast unit prefix | Define whether to use the cast unit prefix or the one in the property Prefix. |
| Start No | Define the Start No of the meshes. |
| Longitudinal bar size | Define the size of the longitudinal bars for the meshes. It can be selected from the Reinforcement Bar Catalog by clicking Select... |
| Cross bar size | Define the size of the cross bars for the meshes. It can be selected from the Reinforcement Bar Catalog by clicking Select... |
| Grade | Define the grade for the meshes. |
| Mesh front side Name | Define the name for the front side mesh. |
| Mesh front side Class | Define the class number for the front side mesh. |
| Mesh back side Name | Define the name for the back side mesh. |
| Mesh back side Class | Define the class number for the back side mesh. |