Albion Cladding Joint Rail Column (60) - Parameters tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Parameters tab in the Albion Cladding Joint Rail Column Properties panel to control how the connecting members are defined within Tekla Structures.
Image
| Option | Description | Default | Other | ||||
|---|---|---|---|---|---|---|---|
| Face Strut to the (Left, Right) |
This controls the direction of the strut created. If this is set to Left then looking from the first rail selected to the second, the rail support will be orientated so that the strut faces to the left. The Right option similarly causes the rail support to face to the right. | The default is set to Left. |
|
||||
| Rail Thickness (1.6, 2.0) |
This sets the thickness of the cladding joint rails that are placed between each pair of rails in the bay. | The default setting is 1.6 mm. | |||||
| General Bolt Grade | This sets the standard for all bolts added by the macro. | The default setting is 4.6XOX. | |||||
| Group | This sets the class that all parts will be included in. | The default setting is 99. |
See also
Albion cold rolled - Important information
Albion Cladding Joint Rail Column (60)
Albion Cladding Joint Rail Column (60) - Parts tab