Leg Base
2021
Tekla Structures
2020
Tekla Structures
Environment
Not environment-specific
Contents
Purpose and description
System Requirements
Using the Leg Base
Leg Base settings
Additional information
Purpose and description
A component to apply a base detail to a tower leg.System requirements
Tekla Structures.Using the Leg Base
To use the component:- From the component catalog select the Leg_Base component.
Image
- Select the leg and an insertion point.
Leg Base settings
Parameters TabImage
| Property | Description |
|---|---|
Image
| The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary. |
Image
| Option to create the Bolts. |
Image
| Option to specify the dimensions to the holes. |
Image
| Option to create the Bolts. |
Image
| Option to specify the cleat dimesnions. |
Image
| Option to specify the dimensions from the end of the leg to the cleats. |
Bolts Tab
Image
Image
| Option to specify the bolt locations. |
Image
| Option to specify the connecting bolt properties. |
Image
| Option to specify the holding down boltlt properties. |
Additional information
- The Component direction must be set according to the directions shown in the dialog before applying.