Furring Panel

Tekla Structures
2021
Tekla Structures
2020
Tekla Structures
2019i
Tekla Structures
2019
Tekla Structures
2018i
Tekla Structures
2018
Tekla Structures
Environment
Not environment-specific

Back to top

Purpose and description

This component will insert a furring panel (Board+studs and/or insulation)
Back to top

System requirements

Tekla Structures
Back to top

Using the Furring Panel

Image
Furring_Panel.png

To use the extension:
  1. Select the component
  2. Select 1st insertion point
  3. Select 2nd insertion point
Back to top

Furring Panel settings

Image
1_Parameter_Dialog.png


PropertyDescription
  
Image
MF_Ref_1.png
Option to add the Assembly Name, Prefix and start Number (the Assembly name is applied to the main part of the Assembly - the main board)
  
Image
MF_Ref_2.png
Option to specify the main board class
  
Image
MF_Ref_3.png
Option to specify the insulation height
  
Image
MF_Ref_4.png
Option to specify the main board and stud height
  
Image
MF_Ref_5.png
Option to specify the distance to the 1st stud
  
Image
MF_Ref_6.png
Option to specify the stud spacing
  
Image
MF_Ref_7.png
Option to specify the stud class (the class will only change on the 1st stud until the stud spacing is changed)
  
Image
MF_Ref_8.png
Option to specify the insulation class (the class will only change on the 1st insulation until the stud spacing is changed)
  
Image
MF_Ref_9.png
Option to create the insulation
  
Image
MF_Ref_10.png
Option to specify the general properties of the Studs, Board and insulation
  
Image
MF_Ref_11.png
Option to specify the finish for the studs
Back to top

Additional information

  • The class, name, prefix, start number and material of the studs and insulation are not changed until the stud spacing is changed
Back to top
Was this helpful?