Tekla Tedds Engineering Library (April 2021)
2021
Tekla Tedds
Tekla Tedds for Word
Link to download
Environment
Australia
Canada
Eurocode
USA
Materials
Concrete
Steel
Timber/Wood
Back to top
2D analysis - Frame Wizard
UK and Asia
2D analysis - Frame Wizard
2D analysis - Truss Wizard
[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (EN1993) calculation.
Bolt group analysis
[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.
Column base plate design (EN1993)
[TEDDS-5513]1 - Fixed illegal mathematical relationship.
[TEDDS-5535]1 - Fixed weld length for CHS shear check
RC corbel design (EN1992)
[TEDDS-5495]1 - Removed maximum distance to vertical force limitation.
Removed maximum corbel width limitation.
Enhanced so corbel width defaults to the minimum allowable value.
Refactored input variable limitations so values are not reset automatically
RC wall design (EN1992)
[TEDDS-5615]1 - Fixed incorrect argument error immediately after calculating a new document.
Steel column design (EN1993)
[TEDDS-5565]1 - Fixed incorrect argument in function for system variable 'output_summary_table'.
Steel to concrete simple connection design (EN1993)
[TEDDS-5556]1 - Fixed illegible sketch when punching shear perimeter is shown.
Back to top
2D analysis - Frame Wizard
RC 2D analysis & design (ACI318)
Wood member analysis & design (NDS)
USA
2D analysis - Frame Wizard
2D analysis - Truss Wizard
[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (AISC360) calculation.
Bolt group analysis[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.
RC 2D analysis & design (ACI318)
RC beam analysis & design (ACI318)
RC beam design (ACI318)
[TEDDS-5435]1 - Fixed an error in the zone reinf. details dialog where the reinforcement details couldn't be changed when designing a beam as a short span.
[TEDDS-5438]1 - Fixed a missing pass/fail status for top reinforcement when designing a beam as a short span.
[TEDDS-5456]1 - Fixed a pass/fail status message when using user defined areas and depths in the design only calculation.
Wood beam analysis & design (NDS)
[TEDDS-3772]1 - Corrected deflection check results for beams with negative deflection reported.
Wood ledger design (NDS)
[TEDDS-5453]1 - Revise calculation of load duration factors for load combinations including seismic and/or rain loads
Wood member analysis & design (NDS)
Wood 2D analysis & design (NDS)
[TEDDS-5603]1 - Corrected expression error, undefined variable 'Temperature'.
Wood shear wall design (NDS)
[TEDDS-5533]1 - Fixed '_LibXUX' undefined variable error.
Back to top
2D analysis - Frame Wizard
Europe
2D analysis - Frame Wizard
2D analysis - Truss Wizard
[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (EN1993) calculation.
Bolt group analysis
[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.
Column base plate design (EN1993)
[TEDDS-5513]1 - Fixed illegal mathematical relationship.
[TEDDS-5535]1 - Fixed weld length for CHS shear check
RC corbel design (EN1992)
[TEDDS-5495]1 - Removed maximum distance to vertical force limitation.
Removed maximum corbel width limitation.
Enhanced so corbel width defaults to the minimum allowable value.
Refactored input variable limitations so values are not reset automatically
RC wall design (EN1992)
[TEDDS-5615]1 - Fixed incorrect argument error immediately after calculating a new document.
Steel column design (EN1993)
[TEDDS-5565]1 - Fixed incorrect argument in function for system variable 'output_summary_table'.
Steel to concrete simple connection design (EN1993)
[TEDDS-5556]1 - Fixed illegible sketch when punching shear perimeter is shown.
Back to top
2D analysis - Frame Wizard
Australia
2D analysis - Frame Wizard
2D analysis - Truss Wizard
[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (AS4100) calculation.
Bolt group analysis
[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.
Back to top
Canada
Footnotes
1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.
Back to top