TSAC-1748 |
Concrete components |
Wall layout opening: Selecting the opening with rollover highlight switched on has been optimized. |
TSAC-3377 |
Concrete components |
Wall layout: Previously, the wall layout was not created to the correct elevation if the height option "Z0+Z1 " was applied. The preview showed correct elevation, though. This has now been fixed. |
TSAC-3386 |
Concrete components |
Concrete foundation (1030): Previously, there was an extra distance in the model when offsetting the created tubes and rebars. This extra distance has been removed. Now the distance corresponds with the values set in the component dialog box. |
TSAC-3413 |
Concrete components |
Wall layout has been improved for mirrored layouts. Previously, after the wall layout was copied as mirrored the layout needed to be updated. Using direct modification also caused the layers to be flipped. This has now been fixed. |
TSAC-3596 |
Concrete components |
Wall layout: Previously, using a component to create a single part layer did not work properly. This has now been fixed. |
TSAC-3723 |
Concrete components |
Mesh bars: Creating bars using the Number of bars option now works correctly. |
TSAC-3738 |
Concrete components |
Sandwich and double wall can again be placed by entering a numeric location. |
TSAC-3739 |
Concrete components |
Corbel reinforcement (81): On the Main bars tab, you can now select whether the last rebar segment is horizontal instead of following the inclined corbel edge. This will affect the created traverse stirrups as well.
|
TSAC-3782 |
Concrete components |
Formwork placing tools - Walls: There is a new option to control the Platform layout. When you select the new Preset array option, the start distance and spacing input is dimmed, and the spacing of platform items is taken from the panel layout. With the second option, Custom array (over multiple panels), the platforms are placed as before using the given start distance and spacings. If spacing is not defined, the default spacing of the platform will be used. Now it is possible to define the preset locations of the platform (brackets) for each formwork panel with the new configuration definitions PlatformX in normal (=not tilted panel) and PlatformY in a tilted panel. If these are not defined, the default locations are at the panel extreme edges. |
TSAC-3797 |
Concrete components |
Mesh bars: The number of secondary bars is no longer overwritten by the number of primary bars. |
TSAC-3866 |
Concrete components |
Embedded anchors (8): On the Input tab, you can now use the new Top in form face option in the Up direction list when positioning created anchors. |
TSAC-3885 |
Concrete components |
Previously, parts added to cast units in Geometry detailing strip were incorrectly created when the reference points were beyond part edges. This was mostly visible at wall layout openings, and it has now been fixed. |
TSAC-3955 |
Concrete components |
Reinforced concrete stair (95): The top mesh bars and top anchor are now created properly when the top landing has recesses. |
TSAC-3964 |
Concrete components |
Starter bars for footing (87): Corner bars and side bars now take the values of the standard hooks when the hook length or bending radius values are empty on the Picture tab. |
TSAC-3966 |
Concrete components |
Wall layout seam: Previously, modifying the seam gap/center offset was difficult when the wall layout had any surface layers. This issue has now been fixed. The reason for this issue was that the component dialog box showed the gap/offset of the surface layer even if it could not be modified. An extra manual selection of the layer was required to activate the correct structural layer. |
TSAC-3974 |
Concrete components |
Floor layout: Previously, a new floor layout used the properties of special slabs and openings from an existing modified floor layout when you created the new floor layout using the properties of the existing floor layout. This could result in incorrect slab widths, for example. This has now been fixed. |
TSAC-3984 |
Concrete components |
Embedded anchors (8): A warning message is now shown when unknown material is detected in the input assembly. |
TSAC-4001 |
Concrete components |
Floor layout: Previously, the dialog box for defining floor layout property strips was not always opened. This has now been fixed. |
TSAC-4001 |
Concrete components |
Floor layout: Previously, the dialog box for defining floor layout property strips was not always opened. This has now been fixed. |
TSAC-4046 |
Concrete components |
Floor layout: The dialog box name of Floor layout's detailing strips has been renamed to Floor layout property strip. |
TSAC-4048 |
Concrete components |
Concrete console (110): Previously, incorrect extra secondary parts were selected when using the Cut extra secondary parts option. This has now been fixed. |
TSAC-4089 |
Concrete components |
Mesh bars and Mesh bars by area: The direct modification dimensioning now considers spliced bars as just one bar. This shows a cleaner and faster dimension line when using direct modification. |
TSAC-4132 |
Concrete components |
Formwork placing tools - Walls: When adding panels, automatic fillers are now created correctly. |
TSAC-4234 |
Concrete components |
Wall layout tools: The wall layout opening face handle has been changed to two crossing lines to allow easier selection of openings. |
TSAC-1579 |
Steel components |
Welded tee (32): It is now possible to create bolts between the tee profile and the main part. |
TSAC-1916 |
Steel components |
Welded beam to beam (123): The creation of notches has been improved for profiles which have sloped flanges. |
TSAC-2363 |
Steel components |
Cold rolled overlap (1): Previously, the default position for bolts did not work correctly and the bolt group was not created centered on the profile. This has now been fixed. |
TSAC-240 |
Steel components |
Bent plate (151): Previously, the component created double notches on the top flange. This has now been fixed. |
TSAC-307 |
Steel components |
Tapered column-beam stub (150): Previously, the bottom weld access hole cut was incorrectly created. This has now been fixed. |
TSAC-320 |
Steel components |
Unfold surface (21): Previously, multiple cuts were created in the same position when the component had been modified using the Modify button. This has now been fixed. |
TSAC-3479 |
Steel components |
Shear plate simple (146): Previously, the flanges of the secondary beam were cut to avoid the collision with rounding areas of the main part also when the secondary beam was already cut back from the main part web. This has now been fixed. |
TSAC-3501 |
Steel components |
Offshore (194): It is now possible to create haunches as plates. |
TSAC-3618 |
Steel components |
Portal bracing (105): It is now possible to specify the material, name, and class of tee profiles. |
TSAC-3664 |
Steel components |
Multiple stiffeners (1064): It is now possible to specify a square chamfer type as a stiffener chamfer. |
TSAC-3675 |
Steel components |
Cold rolled overlap (1): The component now supports the AutoDefaults rule group settings. |
TSAC-3713 |
Steel components |
Central brace tube conn Pl (50): Previously, there was a gap between the connection plate and gusset plate when using the component to connect only one secondary part. This has now been fixed. |
TSAC-3744 |
Steel components |
Column - 2 beam (14): Previously, the plate between the column and beams was created incorrectly when the bolt offset from the plate center line was specified. This has now been fixed. |
TSAC-3810 |
Steel components |
Weld preparation (44): On the Parameters tab, it is now possible to specify separate chamfer sizes and weld access hole sizes for the top and bottom flange. |
TSAC-3829 |
Steel components |
Two sided clip angle (143): Previously, when the bolt dimensions on the BoxPBolts tab were smaller than the bolt dimensions on the BoxSBolts tab, the angle boxes were created incorrectly. This has now been fixed. |
TSAC-3897 |
Steel components |
Bolted gusset (11), Tube gusset (20) and Gusseted cross (62): It is now possible to create a rounded cut by specifying a radius on the Gusset tab when the gusset is slotted through the main part. |
TSAC-3914 |
Steel components |
Two sided end plate (142): Creating the component with secondary parts as C profiles has now been improved. |
TSAC-3925 |
Steel components |
Stairs (S71): Previously, the error message "Illegal input" was shown even when the component was created correctly. This has now been fixed. |
TSAC-3965 |
Steel components |
Cage ladder (S60): It is now possible to specify the assembly prefix and number for hoops and vertical bars. |
TSAC-3967 |
Steel components |
Stair base detail (1038): Previously, all welds in the component were created twice in the same place. This has now been fixed. |
TSAC-4011 |
Steel components |
Splice connection (77): Welds between the deck plates and input parts now have the correct direction. |
TSAC-4015 |
Steel components |
Stair base detail (1043): It is now possible to specify bolt assembly attributes and extra length for bolts on the Sbolts tab. Also, it is now possible to create custom components instead of bolts on the Sbolts tab. |
TSAC-4059 |
Steel components |
Column - 2 beam (14): Previously, the component did not work correctly when the secondary part profile was a C or U profile. This has now been fixed. |
TSAC-4076 |
Steel components |
Shear plate simple (146): Previously, the bolt protection area was created too large, and it cut unwanted parts of the secondary beam. This has now been fixed. |
TSAC-4077 |
Steel components |
Column with stiffeners W (182): Previously, the bolt protection area was created too large, and it cut unwanted parts of the secondary beam. This has now been fixed. |
TSAC-4078 |
Steel components |
Column with stiffeners S (187): Previously, the bolt protection area was created too large, and it cut unwanted parts of the secondary beam. This has now been fixed. |
TSAC-4101 |
Steel components |
Web stiffened end plate (1016): Previously, the additional beam name was also applied as the additional beam finish. This has now been fixed. |
TSAC-2523 |
Import, export, interoperability |
Layout manager: The issues that caused exporting of layout points from Layout manager to fail have now been fixed. |
TTSD-27763 |
Import, export, interoperability |
3D DGN export: The export failed in some environments, this has now been fixed. |
TTSD-31540 |
Import, export, interoperability |
The DWG export now uses the units that have been defined for the current model in the Options dialog box. |
TTSD-32440 |
Import, export, interoperability |
The pour phase attribute is now transferred between Tekla Strucutral Designer and Tekla Structures when the advanced option XS_ENABLE_POUR_MANAGEMENT is set to TRUE . |
TTSD-32443 |
Import, export, interoperability |
The design intent rebar from Tekla Structural Designer is now transferred for Foundation mats when importing a Tekla Structural Designer model if a compatible version of Tekla Structural Designer is installed. |
TTSD-32444 |
Import, export, interoperability |
The concrete cover used in design by Tekla Structural Designer is now transferred for Foundation mats when importing a Tekla Structural Designer model when a compatible version of Tekla Structural Designer is installed. |
TTSD-33697 |
Import, export, interoperability |
Trimble Connector: Previously, uploading the same reference model with a different name was only possible for IFC reference models. Now, you can do so for other types of reference models as well. |
TTSD-34210 |
Import, export, interoperability |
Previously, Trimble Connector sometimes crashed when you closed a Tekla Structures model and opened another model too quickly. This has now been fixed, so that Trimble Connector waits for the second model to open, and closes if the model is still unavailable after the waiting period. |
TTSD-34274 |
Import, export, interoperability |
Drawing DWG export is now more robust with symbol handling. |
TTSD-34276 |
Import, export, interoperability |
You can now zoom in to overlay models by right-clicking objects in the overlay models and selecting Zoom Selected. |
TTSD-34419 |
Import, export, interoperability |
You can now align clip planes with the faces of overlay model objects. |
TTSD-34437 |
Import, export, interoperability |
When you inquire the properties of overlay model objects, the objects now have original identifiers in the Inquire object dialog box. |
TTSD-34442 |
Import, export, interoperability |
You can now select top-level assemblies in overlay models when you have selected the Assemblies and cast units selection switch. Note that you cannot select sub-assemblies. |
TTSD-34497 |
Import, export, interoperability |
Ifc2x3 export: Support for exporting transparencies to the current view export (Use current view colors selected) has been added. |
TTSD-34501 |
Import, export, interoperability |
TS;;Beam exported as an IfcMechanicalFasterner can now have additional property set properties. The properties are fetched from the TS::Beam object. |
TTSD-34677 |
Import, export, interoperability |
In the Trimble Connect - Models dialog box, yellow warning icons are now shown next to broken overlay models that cannot be shown on top of the Tekla Structures model. |
TTSD-34721 |
Import, export, interoperability |
Rebars in overlay models are now shown correctly when you use the Components wireframe and Show only selected component rendering options. |
TTSD-34751 |
Import, export, interoperability |
IFC export: If a complicated cut is exported as B-rep, then also the main panel or slab is exported as B-rep. This fix is mainly for the Export To Aveva extension. |
TTSD-34865 |
Import, export, interoperability |
IFC object conversion: All parametric C profile start and end points have now been switched. Earlier, they were incorrectly oriented after being converted to Tekla Structures parts. |
TTSD-34907 |
Import, export, interoperability |
Previously, Tekla Structures could sometimes select or clear the Start Trimble Connect collaboration check box without user input. This has now been fixed. |
TTSD-34908 |
Import, export, interoperability |
Previously, when you redrew a model view rendered with OpenGL, incorrect edge line offsets sometimes appeared in the attached overlay models. This has now been fixed. |
TTSD-34954 |
Import, export, interoperability |
IFC2x3 export: The export sometimes used incorrect object colors when exporting using representation. This has now been fixed. |
TTSD-34975 |
Import, export, interoperability |
If uploading the Tekla Structures model to Trimble Connect as a .tekla file fails, the error details are now logged in the PublishToTrimbleConnect log file. This log file is located in the \logs folder under the current model folder. |
TTSD-35006 |
Import, export, interoperability |
You can now use dynamic strings as user-defined attributes (UDAs) in IFC export and reports. To add a dynamic string as an UDA, set it as a user-defined template attribute in the Property Set Definitions dialog box. |
TTSD-35180 |
Import, export, interoperability |
Previously, after a model was saved in the multi-user mode, the attached overlay models disappeared. This has now been fixed. |
TTSD-35417 |
Import, export, interoperability |
IFC4 export: In the export dialog box, if the name of the additional property set contained spaces, the text after the space disappeared. This has now been fixed. |
TTSD-35692 |
Import, export, interoperability |
Rebars in exported .tekla models are now colored according to their classes. |
TTSD-35802 |
Import, export, interoperability |
The assembly hierarchy in the current Tekla Structures model is now written correctly when you convert the model into a .tekla reference model using the Upload model command. |
TTSD-36050 |
Import, export, interoperability |
IFC2x3 export: Previously, the IFC2x3 export exported bolts as transparent. This has been fixed. |
TPLED-145 |
Templates and reports |
The contents of the hidden templates in drawings are no longer calculated, which reduces the drawing opening time. |
TPLED-166 |
Templates and reports |
Template Editor: Tekla Structures occasionally crashed when a multiline valuefield was used in a template. This has now been fixed. |
TTSD-34611 |
Templates and reports |
In Template Editor, the Reset button was missing from the Picture Properties dialog box. This has now been fixed. |
TTSD-34854 |
Templates and reports |
Template Editor: When a template file is double-clicked in the file explorer, the dialog box to select the environment is now shown and Template Editor is opened with the correct (selected) environment. |
TTSD-35628 |
Templates and reports |
There is a new custom template attribute, CUSTOM.ELEMENT_WEIGHT.REINFORCED .
The attribute calculates the element weight as follows: The volume of concrete parts minus the volume of steel embeds and reinforcing bars multiplied by a concrete density of 2450 kg/m3 (hard-coded) to achieve the concrete weight. Then the weight of the concrete, reinforcement, and embeds are summed up. Note! The calculation uses a steel density of 7850 kg/m3 for steel embeds. Steel embeds and reinforcing bars are assumed to be completely within the concrete. The attribute does not take reinforcement meshes into account.
The new CUSTOM.ELEMENT_WEIGHT.REINFORCED is more accurate in cast units with dense reinforcement than the existing CUSTOM.ELEMENT_WEIGHT . |
TSAC-2014 |
Drawings |
Rebar pull-out picture and marking: A new option Show exaggerated has been added on the Rebar tab to exaggerate the rebar shape when some reinforcement parts are overlapping. |
TSAC-3869 |
Drawings |
Rebar pull-out picture are marking: The representation of the bar shapes with multiple bending radii has been fixed. |
TSAC-4040 |
Drawings |
Rebar pull-out picture and marking: The mark content was not displayed when Total number in drawing was in use with rebar sets and rebar groups. This has now been fixed. |
TSAC-4230 |
Drawings |
The Rebar mesh view creator macro did not work properly if the cast unit contained a bent mesh. This has now been fixed. |
TSAC-957 |
Drawings |
Rebar pull-out picture are marking: The representation of rebar shapes with a bending radius of 0 has now been fixed. |
TTSD-18430 |
Drawings |
Print preview and output will now reflect the changes made to an open drawing. |
TTSD-23589 |
Drawings |
Printing: Previously, hatches were sometimes placed outside their boundaries and covered areas incorrectly. This has now been fixed. |
TTSD-28083 |
Drawings |
In GA drawings, opening symbols were not shown in reflected views, now they are shown as expected. |
TTSD-28547 |
Drawings |
Previously, when you sorted Document manager by several columns, Tekla Structures scrolled to the bottom of Document manager. This has now been fixed. |
TTSD-29849 |
Drawings |
The attributes *_LEVEL_BASEPOINT and *_LEVEL_PROJECT were changed to string, and new attributes *_LEVEL_UNFORMATTED_BASEPOINT and *_LEVEL_UNFORMATTED_PROJECT were created as double. |
TTSD-30910 |
Drawings |
Rectangle objects are now displayed correctly in drawings. |
TTSD-32591 |
Drawings |
The Print Drawings dialog box incorrectly updated the preview while printing documents. This has now been fixed. |
TTSD-32650 |
Drawings |
When Use multiple printers was selected in the Print Drawings dialog box, and you loaded printing settings, and tried to save the settings with a new name, the name was reverted to the name of the earlier settings file. This has now been fixed. |
TTSD-32728 |
Drawings |
Reference models that were not visible in the drawing could sometimes extend the drawing restriction box unnecessarily. This has now been fixed. |
TTSD-32784 |
Drawings |
Previously, you could not change the units and format of some level templates in drawing marks. This has now been fixed. |
TTSD-33090 |
Drawings |
Dimension associativity rule list was previously showing incorrect text for some cuts. This has now been fixed. |
TTSD-33630 |
Drawings |
Overlaying snapshots in drawings now works more fluently. |
TTSD-33763 |
Drawings |
Now the placement of angular dimensions, radial dimensions and curved dimensions with orthogonal reference lines is set to Fixed when you have dragged the dimension if the advanced option XS_CHANGE_DRAGGED_DIMENSIONS_TO_FIXED is set to TRUE . |
TTSD-34284 |
Drawings |
A rebar dimension mark no longer changes its orientation if any of the properties are modified with the contextual toolbar. |
TTSD-34348 |
Drawings |
Clicking different options in dimension associativity rule list now works better. |
TTSD-34361 |
Drawings |
The dimension associativity rule list was sometimes showing an empty line for bolts. This has now been fixed. |
TTSD-34370 |
Drawings |
When dimensioning type Overall was used in section views, Tekla Structures created duplicate views with same section mark. Now this has been fixed and there is only one A-A view visible, for example. |
TTSD-34381 |
Drawings |
Tekla Structures occasionally crashed when drawing bolt dimensions. This has now been fixed. |
TTSD-34411 |
Drawings |
The Default associativity rule is not shown in the associativity rule list, unless it is the only rule available, or if it has been previously selected as the active rule for the chosen point. |
TTSD-34464 |
Drawings |
Merging bolt marks now works more reliably. |
TTSD-34521 |
Drawings |
The Undo command now works more reliably for curved dimensions. |
TTSD-34565 |
Drawings |
Previously in some cases, items were misplaced and incorrectly oriented in GA drawings. This has now been fixed. |
TTSD-34690 |
Drawings |
Dimension associativity rule lists sometimes did not show the selected associativity correctly for existing dimensions. This has now been fixed. |
TTSD-34693 |
Drawings |
In certain rare cases the drawing view label used to disappear completely after selecting and unselecting the drawing view. Now the label is visible after unselect. |
TTSD-34765 |
Drawings |
Dimension associativity rule list no longer jumps as much as before. |
TTSD-34888 |
Drawings |
Highlighting parts when double-clicking a row in the dimension associativity rule list now works more reliably. |
TTSD-34960 |
Drawings |
Cloning drawings with moved views resulted in empty drawings. This has now been fixed. |
TTSD-35012 |
Drawings |
In the .htc file for hatch pattern settings, material names can now be 32 characters long. Previously, the character limit was 21 characters. |
TTSD-35137 |
Drawings |
Tekla Structures can now automatically find paper sizes for drawings in the US imperial environment. |
TTSD-35204 |
Drawings |
Rebar dimension mark prefix and post fix mark editing when subgrouping is off now updates the drawing. |
TTSD-35349 |
Drawings |
Drawing views were sometimes incorrectly rotated when an assembly/cast unit drawing was created for a subassembly. This has now been fixed. |
TTSD-35516 |
Drawings |
The arrow symbol 0 (no arrow) is now always available in drawing properties, view properties and mark properties, despite the values in the arrows.txt file. |
TTSD-35828 |
Drawings |
When you create rebar dimension marks for tapered or curved rebar groups and Tekla Structures asks you to pick a side, free snapping is now automatically enabled. This means that you can pick any position within the view boundary that contains the selected rebar group. |
TTSD-35792 |
System and options |
The TeklaStructuresModel.xml file now contains the same Tekla Structures product version (new tag "ProductVersion") as the value used for registry (key "Version"). |
TTSD-35246 |
Tekla Model Sharing |
Previously, when you modified drawing properties in a shared model, the changes list could sometimes be disabled. This has now been fixed. |
TTSD-35457 |
Tekla Model Sharing |
Users with Viewer or Project viewer roles can now join shared models again. |
TTSD-12143 |
Modeling |
When a model has an autosaved version, and Tekla Structures is launched with a bypass.ini file, Tekla Structures now shows the dialog box where you can select which version of the model to open. |
TTSD-29131 |
Modeling |
When selecting a role in the US environment or in the UK environment, you cannot select the role separator row (Imperial roles, Metric roles) in the list of roles anymore. |
TTSD-29710 |
Modeling |
Previously, certain Logitech mouse drivers could cause a crash when the middle wheel was tilted (horizontal scroll). This has now been fixed. |
TTSD-29779 |
Modeling |
Previously, option type UDAs could only have 50 options in the list of options. This issue appeared when using the side pane, Organizer, or in the Open API. Now option type UDAs can have 400 options. |
TTSD-30247 |
Modeling |
Previously, when you had modified parts with bolt groups and tried to undo the changes, the Undo command did not work correctly. This has now been fixed. |
TTSD-30727 |
Modeling |
Previously, using Save as to save the model could result in invalid rebar sets. This has now been fixed. |
TTSD-32798 |
Modeling |
When you selected assembly objects using the ALT key and the assembly contained a macro, inquiring the center of gravity caused Tekla Structures to crash. This does not happen anymore. |
TTSD-32859 |
Modeling |
Previously, the coordinate symbol did not follow the local coordinate system when the view was created with the On plane command. This has now been fixed. |
TTSD-33341 |
Modeling |
Previously, setting the work plane could in some cases cause small deviations in the accuracy of work plane coordinates. This has now been fixed. |
TTSD-33673 |
Modeling |
Bent plates, lofted plates and slabs, and spiral and curved beams can now be converted to items. Earlier, they could not be converted. |
TTSD-33754 |
Modeling |
Previously, if two or more pour objects overlapped and had overlapping pour breaks, deleting the pour break that had been created first also deleted the second pour break, even if the pour breaks were not dependent on each other. This does not happen anymore. You can now separately delete the pour breaks. |
TTSD-35145 |
Modeling |
Previously, the Tekla Structures session history log showed unnecessary warnings. This has now been fixed. |
TTSD-35740 |
Modeling |
Copying construction circles with the Copy with offset command did not work in the z direction. This has now been fixed. |
TSAC-4035 |
Installation |
You can now resize the Migration Wizard dialog box. |
TSAC-4214 |
Tools and components |
Layout manager: Previously, there was an error when opening the Layout manager settings so that the settings dialog box did not open at all, and you could not change the export units, for example. This has now been fixed. |
TTSD-34876 |
Tools and components |
Symbol Editor: Previously, saving with Save As did not work if the edited symbol file was located in the model folder. This has now been fixed. |
TTSD-35456 |
Tools and components |
Tekla Structures sometimes crashed when you used custom components with .dat files in several models during a single Tekla Structures session. This has now been fixed. |
TTSD-35464 |
Tools and components |
Modifying a system component previously produced a status bar message: Outdated component was updated to match the current component definition. Now the message is only displayed for modified and updated custom components. |
TTSD-33055 |
User interface |
Previously, when customizing the contextual toolbar for construction arcs, lines and polycurves, the preview was not shown. Also, customization was not working. This has now been fixed. |
TTSD-34855 |
User interface |
The part numbering series for concrete objects cannot be retrieved and modified using the property pane anymore. If you want to have your own part numbering series for certain concrete objects, the old steel part properties dialog box can be used. You can open it by typing steel beam properties into the Quick Launch box. |
TSAC-3993 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): You can now disable/enable the usage of the data conversion file by clearing the check box next to the Data conversion file setting on the Parameters tab. |
TSAC-3995, TSAC-4186 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68) improvements:- The Export of weep holes setting on the Plotter data tab:
- At end zones only (previous option Yes): Provides weep holes at the slab end zones of the hollowcore only.
- At end zones and filled cores: Provides weep holes for the end zones of hollowcore and also adds weep holes on the both sides of any filled cores. Filled core parts can be specified by class or by name.
- At filled cores only: Provides weep holes around filled cores only.
- No is still the default value.
- On the Data settings tab a new setting Tag for filled cores has been added. For Tag for filled cores, you can enter either a single string (the name) or multiple strings. Tekla Structures will then use the entered name or names as filter criteria to determine filled cores from the model. Depending on the selected option the placement of the weep holes will be calculated and written to the export file.
- The option to specify the representation of lifters has been moved from the Data settings tab to the Plotter data tab and renamed to Plot lifters.
|
TSAC-4010 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Straight rebars with hooks are now excluded from the export when Rebar export - Straight is set to Uncollected. |
TSAC-4019 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Using the new option Plot irregular cutout/recess - As lines on the Plotter data tab you can export bounding box cutouts/recesses that overlap a diagonal edge as lines. |
TSAC-4023 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Now, when there are multiple wire sizes in the same layer for the same direction of wires in the STEELMAT block, they are exported with the same concrete cover (the same Z coordinate offset). |
TSAC-4024 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Previously, some meshes, on a slightly inclined plane compared to pallet plane, were not correctly rotated to the pallet plane with option Meshes export: Turned to pallet. This has now been fixed. |
TSAC-4075 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): You can now specify that reinforcement type 1 rebars will always be the lowest rebars of a mesh regardless of the mesh orientation on the pallet. To do this, use the new Reinforcement types option Bottom rebar = type 1 on the Reinforcement tab. |