Formats de fichiers et logiciels compatibles avec Tekla Structures
Les tableaux suivants répertorient les possibilités d’interopérabilité de Tekla Structures.
La liste Formats de fichiers compatibles contient tous les formats de fichiers possible pour l'import et l'export dans Tekla Structures.
Les listes des logiciels compatibles incluent les logiciels interopérables avec Tekla Structures. Certains des logiciels répertoriés ont un lien direct avec Tekla Structures. De nombreux liens directs sont disponibles dans Tekla Warehouse.
Formats de fichier compatibles
Vous pouvez importer et exporter plusieurs formats dans Tekla Structures.
Le tableau suivant dresse la liste des différents formats que vous pouvez utiliser dans Tekla Structures pour importer et exporter des données.
Pour utiliser certains formats, vous devez télécharger une extension à partir de Tekla Warehouse.
Format |
Importer |
Export |
---|---|---|
Image 3D (.obj) |
X |
|
aSa (.TEK) |
X |
|
Format Autodesk 3DS Max (.3ds) |
X |
|
Autodesk (.dwg) |
X |
X |
Autodesk (.dxf) |
X |
X |
Bentley ISM |
X |
X |
BIM Collaboration format (.bcf) |
X |
X |
Fichiers Blender (.blend) |
X |
|
Export BTL (.btl) |
X |
|
BVBS (.abs) |
X |
|
CIS/2 LPM5/LPM6 analytique (.stp,.p21,.step) |
X |
X |
Conception CIS/2 LPM5/LPM6 (.stp,.p21,.step) |
X |
X |
Fabrication CIS/2 LPM6 (.stp,.p21,.step) |
X |
|
CPIxml |
X |
|
COLLADA (.dae) |
X |
|
DSTV (.nc,.stp,.mis) |
X |
X |
EJE |
X |
|
Elematic ELiPLAN, ELiPOS (.eli) |
X |
X |
EPC |
X |
|
Fabsuite (.xml) |
X |
X |
FabTrol Kiss (.kss) |
X |
|
FabTrol MIS Xml (.xml) |
X |
X |
FilmBox (.fbx) |
X |
|
GL Transmission Format (.glft) |
X |
|
Fichier High Level Interface (.hli) |
X |
X |
HMS (.sot) |
X |
|
IBB Betsy (.fa, .f, .ev) |
X |
|
IFC2x2 (.ifc) ** |
X |
|
IFC2x3 (.ifc) ** |
X |
X |
IFC4 (.ifc) ** |
X |
X |
IFCXML 2X3 (.ifcXML) ** |
X |
X |
IFCZIP 2x3 (.ifcZIP) ** |
X |
X |
Initial Graphics Exchange Specification (IGES) (.iges,.igs) |
X |
X |
LandXML (.xml) |
X |
|
Microsoft Project (.xml) |
X |
X |
Microstation (.dgn) |
X |
X |
Oracle Primavera P6 (.xml) |
X |
X |
Plant Design Management System (.pdms) |
X |
|
Format de fichier Polygon (.ply) |
X |
|
SAP, Oracle, ODBC, etc. |
X * |
X * |
SketchUp (.skp) |
X |
X |
Staad ASCII (.std) |
X |
X |
Steel Detailing Neutral Format (.sdf,.sdnf, .dat) |
X |
X |
Steel12000 |
X |
|
STEP AP203 (.stp,.step) |
X |
|
STEP AP214 (.stp,.step) |
X |
X |
StruM.I.S |
X |
X |
Tekla Collaboration (.tczip) |
X |
X |
Tekla-FabTrol Report (.xsr) |
X |
|
Tekla Structural Designer neutre (.cxl) |
X |
X |
Forme Tekla Structures (.tsc) |
X |
X |
Trimble Field Link (.tfl) |
X |
X |
Trimble LM80 (.txt,.cnx) |
X |
X |
TubeNC (.xml) |
X |
|
Unitechnik (.uni, .cam) |
X |
* Tekla OpenAPI utilisé
** Pour une liste des applications IFC certifiées par buildingSMART international, consultez Logiciels certifiés.
Logiciels Trimble compatibles
Le tableau suivant répertorie les logiciels Trimble compatibles avec Tekla Structures.
Produit Trimble |
Import vers Tekla Structures |
Export depuis Tekla Structures |
---|---|---|
3D+ |
Autodesk (.dwg) Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dwg) Autodesk (.dxf) |
DuctDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
PipeDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Plancal |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp Make |
SketchUp (.skp) |
SketchUp (.skp) |
SketchUp Pro |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
Tekla Field3D |
IFC2X3 (.ifc) |
|
Tekla Civil |
Lien direct LandXML (.xml) |
Lien direct IFC2X3 (.ifc) |
Tekla Collaboration |
Fichiers Tekla Collaboration ( .tczip) |
Fichiers Tekla Collaboration ( .tczip) |
Tekla Structural Designer |
XML neutre (.cxl) |
XML neutre (.cxl) |
Trimble Business Centre |
LandXML (.xml)) |
|
Trimble Connect |
Lien direct IFC2X3 (.ifc) |
Lien direct IFC2X3 (.ifc) |
Trimble Field Link |
Trimble Field Link (.tfl) |
Trimble Field Link (.tfl) |
Trimble LM80 Desktop |
Autodesk (.dxf) LM80 (.cnx, .txt) |
Autodesk (.dxf) LM80 (.cnx, .txt) |
Vico Office |
Lien direct |
|
Autodesk (.dwg) |
||
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
||
IfcXML 2X3 (.xml) |
IfcXML 2X3 (.xml) |
|
Microstation (.dgn) |
||
Feuilles de calcul Excel (.xls) |
Feuilles de calcul Excel (.xls) |
|
Vico Schedule Planner |
Lien direct .xml |
Lien direct .xml |
Logiciel compatible avec les liens directs
Le tableau suivant répertorie les logiciels qui possèdent un lien direct Tekla Structuresavec pour importer et exporter des données.
De nombreux liens directs sont disponibles dans Tekla Warehouse.
Le tableau répertorie également les formats de fichier que vous pouvez utiliser si le lien direct n’est pas possible.
Produit |
Entreprise |
Import vers Tekla Structures |
Export depuis Tekla Structures |
---|---|---|---|
ADConX |
ADConX |
Lien direct |
|
AxisVM |
Inter-CAD Kft. |
Lien direct |
Lien direct IFC2X3 (.ifc) |
BeamMaster |
AGT |
Lien direct |
|
Bentley Architecture |
Bentley |
Lien direct (ISM) |
Lien direct (ISM) |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Structural |
Bentley |
Lien direct (ISM) |
Lien direct (ISM) |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
|||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
CYPECAD |
Cype |
Lien direct |
|
Diamonds |
Buildsoft |
Lien direct |
Lien direct |
Fabsuite |
Fabsuite |
Lien direct KISS (.kss) |
Lien direct KISS (.kss) |
FEM Design |
StruSoft |
Lien direct IFC2X3 (.ifc) |
Lien direct IFC2X3 (.ifc) |
IDEA StatiCa |
IDEA StatiCa |
Lien direct |
|
Joints For Tekla |
Progetto Archimede |
Lien direct |
|
Lantek |
Lantek |
Lien direct |
Lien direct |
LIRA-SAPR |
LIRA SAPR |
Lien direct (Défaut, Russie) |
Lien direct (Défaut, Russie) |
LIRA 10 |
LIRA SOFT |
Lien direct (Russie) |
Lien direct (Russie) |
Meridian Prolog |
Trimble |
Lien direct |
|
Midas Gen |
MIDAS |
Lien direct |
Lien direct |
ModeSt |
Tecnisoft |
Lien direct |
Lien direct |
PEMA WeldControl |
Pemamek |
Lien direct |
|
Pipelabo |
Maruhide |
Lien direct |
|
PowerConnect |
Buildsoft |
Lien direct |
Lien direct |
PowerFrame |
Buildsoft |
Lien direct |
Lien direct |
ProCAM |
HGG |
Lien direct |
Lien direct |
Pro-Fit |
Zeman |
Lien direct |
|
Qnect |
Qnect |
Lien direct |
|
Raptor |
Peddinghaus |
Lien direct |
|
RFEM |
Dlubal |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) IFC2X3 (.ifc) |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) IFC2X3 (.ifc) |
RISA 3D (Suite) |
Risa Technology |
Lien direct (marché US) |
Lien direct (marché US) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
RisaConnection |
Risa Technology |
Lien direct (US, RU, Allemagne, Suède, Norvège, Chine, Inde, Australie) |
Lien direct (US, RU, Allemagne, Suède, Norvège, Chine, Inde, Australie) |
Robot Millenium |
Autodesk |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) Conception CIS/2 LPM6 (.stp, .p21, .step) |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) Conception CIS/2 LPM6 (.stp, .p21, .step) |
RSTAB |
Dlubal |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) IFC2X3 (.ifc) |
Lien direct CIS/2 LPM6 analytique (.stp, .p21, .step) IFC2X3 (.ifc) |
SAP2000 |
Computers & Structures, Inc. |
Lien direct |
Lien direct |
Lien direct (ISM) |
Lien direct (ISM) |
||
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
SCIA |
Nemetschek |
Lien direct |
Lien direct |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
S-FRAME |
S-FRAME Software Inc. |
Lien direct Autodesk (.dxf) |
Lien direct Autodesk (.dxf) |
Sicam |
Controlled Automation |
Lien direct |
|
STAAD.Pro |
Bentley |
Lien direct |
Lien direct |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Fichier ASCII Staad (.std) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
ISM |
ISM |
||
Steel Projects PLM |
Steel Projects |
Lien direct |
Lien direct |
StruM.I.S |
StruM.I.S |
Lien direct |
BSWX (.bswx ) |
Vacam |
Voortman |
Lien direct |
Logiciels compatibles
Le tableau suivant dresse la liste des logiciels compatibles avec Tekla Structures et des formats que vous pouvez utiliser pour l'import et l'export de/versTekla Structures.
Pour une liste des applications IFC certifiées par buildingSMART international, consultez Logiciels certifiés.
Pour en savoir plus sur les différents outils d'importation et d'exportation, consultez Importer vers et exporter depuis Tekla Structures.
Produit |
Entreprise |
Import vers Tekla Structures |
Export depuis Tekla Structures |
---|---|---|---|
3ds Max |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
3ds Max Design/VIZ |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
A+ Software | ArmaPlus |
BVBS (.abs) Soulé (.xml) aSa (.TEK) |
|
Adapt |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Advanced Steel, Advanced Design/Engineering |
Autodesk |
CIS/2 LPM5 analytique (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
CIS/2 LPM5 analytique (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
Allplan/ Planbar |
Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
ANSYS |
ANSYS |
IGES (.iges, .igs) |
IGES (.iges, .igs) |
ArchiCAD |
Graphisoft / Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
IFCZIP (.ifczip) |
IFCZIP (.ifczip) |
||
Coordinated view v1 |
Coordinated view v1 |
||
ArchonCAD |
ArchonCAD Ltd. |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
Armaor |
Ariadis |
BVBS (.abs) |
|
Artube |
Adige |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
aSa Rebar |
Applied Systems Associates Inc |
Fichier aSa Rebar (.TEK) |
|
ASI |
Applied Science International LLC |
Fichier ASCII Staad (.std) |
|
AutoCAD |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
AutoCAD Architecture |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IGES (.iges, .igs) |
Microstation (.dgn) |
||
AutoCAD Civil 3D |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Microstation (.dgn) |
|||
Fichiers LandXML (.xml) |
|||
AutoCAD MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
|||
AutoPLANT |
Bentley |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
AutoVue |
Oracle |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) STEP AP214 (.stp,.step) |
|
Aveva E3D |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Fichiers Tekla Collaboration basés sur .ifc (.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Fichiers Tekla Collaboration basés sur .ifc (.tczip) |
AviCAD |
Progress/EBAWE |
Unitechnik (.cam), BVBS (.abs) |
|
Bentley Building Electrical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Building Mechanical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Inroads |
Bentley |
Fichiers LandXML (.xml) |
|
Betsy |
IBB – Consultants & Engineers |
Betsy (.fa), Betsy (.f), Betsy (.ev) |
|
Cadmatic |
Cadmatic |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
CADmep+ |
MAP Software / Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
IFCZip (.ifczip) |
IFCZip (.ifczip) |
||
CADPipe |
AEC Design Group |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
CADWorx Plant |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
CAESAR II |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
CATIA |
Dassault |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
IGES (.iges, .igs) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Concrete Pro |
LAP Laser GmbH |
Autodesk (.dwg) Autodesk (.dxf) Unitechnik (.cam) |
|
ConSteel |
ConSteel Solutions Limited |
ASCII |
|
Corobs |
Müller Opladen |
TubeNC (.xml) |
|
Daystar Software |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
DDS-CAD |
DDS |
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
Digital Project |
Gehry Technologies |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
ebos |
Progress/EBAWE |
Unitechnik (.cam) |
|
elcoCAD |
Hannappel SOFTWAR E GmbH |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
ELiPLAN |
Elematic |
ELiPLAN ( |
ELiPLAN (.eli) |
ELiPOS |
Elematic |
ELiPLAN (.eli) |
|
EliteCAD |
Messerli Informatik |
IFC2X3 (.ifc) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dxf) |
ETABS |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP214 (.stp,.step) |
|||
FabPro Pipe |
UHP Process Piping Inc. |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FabTrol MRP |
FabTrol |
FabTrol MIS XML (.xml) |
FabTrol MIS XML (.xml) Fichier FabTrol KISS (.kss) Tekla-FabTrol Report (.xsr) |
FactoryCAD |
Siemens |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FelixCAD |
SofTec |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Floor Pro |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FormZ |
AutoDesSys, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
FXTube |
Mazak |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
GSA |
Oasys |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
GT Strudl |
GT Strudl |
Autodesk (.dxf) CIS/2 LPM6 analytique (.stp, .p21, .step) |
Autodesk (.dxf) |
HMS |
HMS |
HMS (.sot) |
|
HOOPS |
Tech Soft 3D |
Autodesk (.dwg) Autodesk (.dxf) |
|
Inventor |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
IronCAD |
IronCAD |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
iTWO |
RIB Software AG |
CPIxml (.xml) |
|
KeyCreator |
Kubotek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
LEIT2000 |
SAA |
Unitechnik (.cam) |
|
LP-System |
Lennerts & Partner |
BVBS (.abs) |
|
MagiCAD |
Progman |
Autodesk (.dwg) IFC2X3 (.ifc) |
Autodesk (.dwg) IFC2X3 (.ifc) |
MasterFrame |
MasterSeries |
DSTV96 (.nc, .stp, .mis) |
DSTV96 (.nc, .stp, .mis) |
Maxon Cinema 4D |
Nemetschek |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Maya |
Autodesk |
Autodesk (.dxf) IGES (.iges, .igs) |
STEP AP214 (.stp,.step) Autodesk Maya Autodesk (.dxf) |
Mesh Welding |
EVG (Filzmoser) |
Unitechnik (.cam) BVBS (.abs) |
|
Mesh Welding |
A.W.M. |
Unitechnik (.cam) |
|
Mesh Welding |
Progress/EBAWE |
Unitechnik (.cam) |
|
Microsoft Office Project |
Microsoft |
Project (.xml) |
Project (.xml) |
Microstran |
Engineering Systems Pty Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
Microstation |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
IGES (.iges, .igs) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Multiframe |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Nastran |
MSC Software Corporation |
Autodesk (.dwg) IGES (.iges, .igs) |
Autodesk (.dwg) IGES (.iges, .igs) |
NavisWorks |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) CIS/2 LPM6 analytique (.stp, .p21, .step) IFC2X3 (.ifc) Microstation (.dgn) |
|
NX (Unigraph) |
Siemens |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
PDMS |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Fichiers Tekla Collaboration ( .tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Fichiers Tekla Collaboration ( .tczip) |
PDS |
Intergraph / Hexagon |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Peikko Designer |
Peikko Group Corporation |
Programmes additionnels |
Programmes additionnels |
PipeCAD |
Mc4 Software |
Autodesk (.dxf) |
Autodesk (.dxf) |
Plant-4D |
CEA Technology |
Autodesk (.dwg) Autodesk (.dxf) Microstation (.dgn) |
|
PRIAMOS |
GTSdata |
CPIxml (.xml) Unitechnik (.cam) |
|
Primavera |
Oracle |
P6 (.xml) |
P6 (.xml) |
ProStructures |
Bentley |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
Microstation (.dgn) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
ISM |
ISM |
||
Pro/Engineer |
PTC |
IGES (.iges, .igs) STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
ProFit |
Progress/EBAWE |
BVBS (.abs) |
|
Prokon |
Prokon |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
PythonX |
Lincoln Electric |
DSTV |
|
RAM (CAD Studio) |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
ISM |
ISM |
||
Revit Architecture/MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
Fichiers Tekla Collaboration ( .tczip) |
|||
Revit Structure |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
Fichiers Tekla Collaboration ( .tczip) |
|||
Rhinoceros |
McNeel North America |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Lien Geometry Gym |
Lien Geometry Gym |
||
RinasWeld |
Kranendonk |
IFC2X3 (.ifc) | |
SACS |
Engineering Dynamics Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdnf) |
|
SAFE |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
IGES (.iges, .igs) |
|||
SAM |
Bestech Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
Schnell Software |
Schnell Software |
BVBS (.abs) Unitechnik (armature/treillis) |
|
SDS/2 |
Design Data |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
||
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
Fabrication CIS/2 LPM6 (.stp,.p21,.step) |
|||
Microstation (.dgn) |
Microstation (.dgn) |
||
Smart 3D (SmartPlant / SmartMarine) |
Intergraph / Hexagon |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
Conception CIS/2 LPM6 (.stp, .p21, .step) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
IFC2X3 (.ifc), avec SmartPlant 3D |
|||
Solibri Model Checker/Model Viewer |
Solibri |
IFC2X3 (.ifc) |
|
SolidEdge |
Siemens |
Autodesk (.dxf) |
Autodesk (.dxf) |
Microstation (.dgn) |
Microstation (.dgn) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
SolidWorks |
Dassault |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Soulé |
Soulé Software Inc. |
.xml BVBS (.abs) |
|
SPACE GASS |
SPACE GASS |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
CIS/2 LPM6 analytique (.stp, .p21, .step) |
SpaceClaim |
SpaceClaim Co. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Steel Smart System |
Applied Science International, LLC |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
StructureWorks |
StructureWorks LLC. |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
TurboCAD |
IMSI Design |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
UniCAM |
Unitechnik |
Unitechnik (.cam, .uni) |
|
Unigraphics |
Siemens PLM Software |
IGES (.iges, .igs) |
|
Vernon |
Lincoln Electric |
TubeNC (.xml) |
|
VectorWorks |
Nemetschek |
IFC2X3 (.ifc) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Volo View |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |