|| - Each member is color coded to indicate its autodesign setting
(On or Off). Clicking on a member toggles its setting.
||- Each slab panel and diaphragm node is color coded to indicate
its setting (Excluded or Included). Clicking on a slab or a
diaphragm node toggles its setting.
|| - Each member is color coded to indicate its end fixity setting
(N/A, Pinned, Fixed, Moment, Mixed, Cantilever). Clicking on a
member toggles its fixity setting between those that are
|| - Each member is color coded to indicate its BIM status.
|| - Use property grid to review and edit or rationalize panel or patch reinforcement,
or isolated foundation reinforcement.
|| - Each steel member is color coded to indicate its section and
grade. Clicking on a steel member updates its section and/or grade
to match what you have set in the Properties window.
|| - Copy properties from one member to another. After firstly
selecting a parameter in the Properties window you are able to copy
it from a designated source member to valid target members.
|| - Only accessible once a Member filter has been defined. Each
member is color coded to indicate if it is included in the currently
selected filter. Clicking a member toggles its inclusion
|| - Create selected sub-sets of the structure and use for more
focused editing, design, review and reporting purposes.
|Concrete Beam Flanges
|| - Each concrete beam is color coded to indicate its if flanges
are considered and flange widths determined.
|| - Potential splice locations in steel columns are color coded to
indicate where splices exist.
|| - Graphically review and modify the property set assigned to the
elements by using the property grid. In a typical model you may wish
to apply the same properties to similar model objects. This can be
done efficiently using property sets.
|| - Eraphically review and modify the attribute values assigned to
the elements by using the property grid. User defined attributes
allow you to save your own data to individual elements. These can be
used to select similar elements based upon their UDA group or filter
report content based on a UDA.
|| - The full range of options is available by selecting this and
using the attribute drop down in the property grid.