Modify slab/panel span direction
The span direction of slab items or wall/roof panels can be edited via the Properties window. The span direction of individual slab items and wall/roof panels can also be edited graphically.
Modify a single span direction graphically
- Select the slab/panel item.
Select the span direction
A yellow command prompt is displayed and the Properties window lists the X direction mode options of Align with edge and Define by 2 points
- Select the desired mode.
Select either a slab edge
(of any slab item) or two points, depending on the selected mode.
The slab direction is automatically set to the identified angle.
Modify span direction via the Properties window
- Select the slab/ panel item(s).
In the Properties window enter the required rotation angle/X direction.
The slab span direction is updated to the new angle.