Review design summary tabular results

Tekla Structural Designer
2020
Tekla Structural Designer

Review design summary tabular results

To review a tabular design summary:
  1. Open a view and change the view regime to Review View.
  2. On the Review ribbon, click Tabular Data

    A Review Data tab is added to the ribbon and a Review Data View opens in a new window.

  3. On the Review Data ribbon, in the list in the View Type group, select Design Summary
  4. In the Result Type group, select the analysis type for which the design summary is required.
  5. In the Material Type group, select the material.

    The available selections in the Characteristic group (and the other groups) are reduced to those appropriate to the selected material.
  6. In the Characteristic group, select the required characteristic.

    The available selections in the Construction group are reduced to those appropriate to the selected characteristic.
  7. If applicable, in the Construction group, select the construction.

    The available selections in the Fabrication group are reduced to those appropriate to the selected construction.
  8. In the Fabrication group, select the fabrication.

    The tabular design summary is displayed for every entity of the selected material and type in the structure.

    If required you can configure a filter to limit the display to sub-parts of the structure only (selected levels, selected frames etc.) To do this, see: Filter tabular data

Cela a-t-il été utile?
Précédent
Suivant