Bending schedule attributes

Tekla Structures
2021
Tekla Structures

Bending schedule attributes

The following table lists the attributes and values that can be used for bending schedules in templates.

Attribute

Default value

Available values

FontName

romsim

Available template fonts

FontSize

2.0

Available font sizes

FontColor

1 (black)

1 = black

2 = red

3 = bright green

4 = blue

5 = cyan

6 = yellow

7 = magenta

8 = brown

9 = green

10 = dark blue

11 = forest green

12 = orange

13 = gray

RotationAxis

2

0 = by view

1 = by global Z

2 = by local axis

ScaleType

0

0 = no

1 = yes

If you set the free attribute ScaleType to 1 for the PULLOUT attribute, the pull-out pictures will be scaled to fit the available space in both X and Y dimensions. As a result, the shape becomes out of proportion, but small segments can be seen more easily.

Exaggeration

1

0 = no

1 = yes

EndMark

1

1 = straight

2 = half arrow

3 = full arrow

Dimensions

1

0 = no

1 = yes

BendingRadius

0

Shows the bending radius in form of diameter of the bending roll.

0 = no

1 = yes

BendingAngle

1

0 = no

1 = yes

ImageWidth

Width of the graphical field multiplied by 4.

Number of pixels

ImageHeight

Height of the graphical field multiplied by 4.

Number of pixels

CouplerSymbols

1

Display srebar coupler and end anchor symbols in rebar bending schedules. Rebar coupler symbols will be shown if CouplerSymbols property value is set to 1 and disabled if 0 is entered. The default value is 1.

Oliko tästä apua?
Edellinen
Seuraava