Check changed marks, notes and dimensions and remove change symbols

Tekla Structures
2021
Tekla Structures

Check changed marks, notes and dimensions and remove change symbols

Tekla Structures highlights the marks and dimension marks that have changed due to changes in the model, and dimension points that have been moved. Tekla Structures also highlights the changed angle dimensions, level marks, and associative notes.

Tekla Structures highlights the changes in the following way:

  • A change symbol (by default, a cloud) is drawn around the old point, the new point and the dimension values, or around the changed mark or note.

  • An arrow is drawn from the old dimension point to the new one.

Remove change symbols

After you have checked all the change symbols that Tekla Structures has created in your drawing, you can remove all of them or just the selected ones.

To remove the change symbols, do one of the following in the open drawing:

To

Do this

Remove all change symbols at one go

  • On the Drawing tab, click Remove > All change symbols.

Remove all dimension change symbols

  • On the Drawing tab, click Remove > All dimension change symbols.

Remove the selected dimension change symbols

  1. Select the dimension change symbols you want to remove.

  2. On the Drawing tab, click Remove > Selected dimension change symbol.

Remove all mark change symbols

  • On the Drawing tab, click Remove > All mark change symbols.

Remove the selected mark change symbols

  1. Select the mark change symbols you want to remove.

  2. On the Drawing tab, click Remove > Selected mark change symbol.

Remove all associative note change symbols

  • On the Drawing tab, click Remove > All associative note change symbols.

Remove the selected associative note change symbols

  1. Select the associative note change symbols you want to remove.

  2. On the Drawing tab, click Remove > Selected associative note change symbol.

Examples

The following image shows an example of a mark change symbol after a material change, and of a dimension change symbol after a change in the size of the part.

The following image shows the dimension text and the mark after you have selected Remove > All change symbols.

The following image shows an example of a mark change symbol after a material change, and of a dimension change symbol after a change in the size of the part.

The follwoing image shows the dimension text and the mark after you have selected Remove > All change symbols.

Related advanced options

Oliko tästä apua?
Edellinen
Seuraava