Create a load combination

Tekla Structures
2021
Tekla Structures

Create a load combination

If needed, you can create load combinations for an analysis model one by one.

Before you start, ensure that you have the appropriate load modeling code selected in File menu > Settings > Options > Load modeling > Current code.

  1. On the Analysis & design tab, click A&D models.
  2. In the Analysis & Design Models dialog box:
    1. Select an analysis model.
    2. Click Load combinations.
  3. In the Load Combinations dialog box, click New.
  4. In the Load Combination dialog box:
    1. Select a load combination type from the Type list.
    2. Enter a unique name for the load combination.
    3. Use the arrow buttons to move load groups between the Load groups list and the Load combination table.
    4. If needed, modify the signs (+ or -) and combination factors in the Load combination table by clicking a value.
    5. Click Apply to create the load combination.
    6. If needed, repeat steps a–e to create more load combinations.
    7. Click OK to create the last load combination and close the dialog box.
  5. In the Load Combinations dialog box, click OK to save the load combinations.
Was this helpful?
Edellinen
Seuraava