Create a new model
Create a separate model for each Tekla Structures project. Each model is stored in its own folder under the TeklaStructuresModels folder.
- On the File menu, click New.
-
In the
Name box, enter a name for the new model.
Do not use special characters (
/ \ ; : |
). We recommend that you try to decide on a permanent name at this point. The name of the model can be changed afterward, but it involves changing several file names. -
Define where to save the new model.
By default, the model is saved in the TeklaStructuresModels folder that was created during installation. You can change the default folder by clicking Browse. You can also select a recently used folder in the Place in list.
-
Select whether to run
Tekla Structures in
single-user or multi-user mode.
- Single-user: the model will be used by one person at a time.
- Multi-user: the model is stored on a server and may be used by several people simultaneously. Enter the name of the server in the Server box.
-
If you want to use a
model template, select one.
You can mark the important model templates as favorites, or hide the templates that you do not need.
- Select a model template in the list.
-
Right-click and select
Favorite or Hidden.
If you marked a template as Favorite, it is placed on top of the template list. Alternatively, use the star icon on the template to mark it as Favorite, or to remove the marking.
If you marked a template as Hidden, it is removed from the template list. Select the Show hidden items check box to show it again.
-
If you want to link the model to a Trimble Connect project, select the Start Trimble Connect collaboration check box.
Linking the model to a Trimble Connect project happens after the model has been created. For further instructions, see Link a Tekla Structures model to a Trimble Connect project.
-
Click
Create.
Tekla Structures creates the model and opens the default model view. The contents of the model view may differ based on the model template you chose in step 5.