Log files

Tekla Structures
2018
Tekla Structures

Log files

Tekla Structures writes information to log files when you, for example, number a model or save a model.

File

Description

analysis.log

Tekla Structures stores information in this file when you run the analysis. The file also contains information on the errors that occurred during load distribution. The log is saved in the current model folder.

check_database.log

Tekla Structures stores information in this file when you run the Repair command in File menu > Diagnose & repair > Model. The log is saved in the current model folder.

ClashCheck.log

Contains clashes found in the most recent clash check. The log is saved in the current model folder.

conflict.log

Contains conflicts that have occurred in the multi-user mode when more than a one user has modified an object. The log is saved in the current model folder.

drawing_cloning.log

Contains information on cloned drawings. The log is saved in the current model folder.

drawing_history.log

Contains information on drawing history. Use the advanced option XS_​DRAWING_​HISTORY_​LOG_​TYPE to define the contents of the file. The log is saved in the current model folder.

dstv_nc.log

Each time you create NC files, Tekla Structures stores information in this file about the processed assemblies. The log is saved in the current model folder.

filetranerror.log

Used only for cold rolled components, such as Albion, Ayrshire, and Hispan. If the File Transfer components do not work as expected, Tekla Structures stores error messages in this file. The log is saved in the current model folder.

numberinghistory.txt

Contains full details of each numbering session carried out on the model. Each session is in a different block of the file. The log is saved in the current model folder.

save_history.log

Tekla Structures stores information in this file each time you save a model. The log is saved in the current model folder.

TeklaStructures_<user>.log

Contains information on the entire Tekla Structures session from opening the model to closing it. The file contains, for example, errors and information on which catalogs were used. This temporary log file is saved in the \TeklaStructuresModels folder, and it is removed when you close Tekla Structures.

wizard.log

Tekla Structures stores information in this file when you run a drawing rule set (wizard) file. The file contains, for example, errors and number of drawings created. The log is saved in the current model folder.


Oliko tästä apua?
Edellinen
Seuraava