Review models
When a Review View is active you can select commands on the Review ribbon to graphically display the design status of members, slabs, foundations and connections.
By selecting commands from the Show/Alter State group on the ribbon you can graphically interrogate or modify a variety of model parameters and properties.
By selecting Tabular Data you can interrogate various tabular summaries and lists of data.
Overview of the Review View
The main components on the Review ribbon and view are numbered below:
(1) Review View button
(2) Review ribbon tab
(3) Design Type list
(4) Design, Foundations, Piles, and Slab/Mat Design review buttons
(5) Legend
(6) Show/Alter State button group
(9) Charts button
Working in the Review View
To switch a view to the Review view regime:
- click Review View
(1) in the Status bar, - then click the Review ribbon tab (2).
To graphically review the design status or ratio of
objects in the view:
- select the design type (3) (Static, RSA, or Combined),
- then choose the required Status or Ratio command (4) from the ribbon.
A legend (5) is displayed and objects in the view are color coded accordingly.
To graphically review and edit the properties of objects in the view:
- select a command from the Show/Alter State group (6).
Depending on the command, it can either be reviewed with the aid of a legend, or edited with the aid of the Properties window.
To open a tabular Review Data view:
-
Select Tabular Data
(8). In the tabular view you can display tables of Design Summaries, Sway/Drift Results, Material Lists and more
To open a Charts view:
-
Select Charts
(9). In this view you can display embodied carbon data charts.