To view the raw results for element end forces in tables, see the following instructions.

1. On the Analyze toolbar, click Model & Results.

   A Solver Model Data view opens in a new tab, and the Result Type and View Type groups appear in the ribbon.

2. In the upper list of the Result Type group, select the desired solver model type.
   Note:

   You can view solver element end forces for all solver model types except for:

   • 1st order modal analysis

   • 2nd order buckling analysis

3. In the View Type list, select Element End Forces.
4. In the Loading list at the bottom of the window, select the desired load case, combination, or envelope.

   Tekla Structural Designer displays the raw analysis results of element end forces. This means that no axial load reductions have been applied.

   Note:

   The asterisk next to certain element numbers signifies that the results are actually output at the end of a rigid arm that you have modeled, rather than at the node itself.