Take selected materials from stock

Tekla PowerFab
Tekla PowerFab Tekla PowerFab GO

Take selected materials from stock

Use the TFS - Selected command to take selected inventory items from stock, cut them, and move the cut lengths into the inventory history. The remaining drop remains in the inventory. Once the materials have been taken from stock, you can view or print different reports for the materials.

  1. In the lower navigation tree of the Inventory dialog box, select a job number.

    Only the items within the selected job are displayed in the display area.

  2. Click the Inventory ribbon tab.
  3. On the menu, select Production Control > TFS - Selected.

    The Enter Value dialog box opens.

  4. Enter a date for taking the materials from stock.
  5. Click OK.
  6. To take the selected materials from stock, click Yes in the confirmation dialog box.

    The selected items are taken from stock. You can see the progress in the TFS dialog box. Wait until the process is completed.

  7. Do any of the following:


    Do this

    View or print a report on the TFS process

    1. Click Reports.

      The Report Progress dialog box opens.

    2. Select the report that you want to print or view.

    3. Do any of the following:
      • To view the report, click View.

      • To print the report, click Print, select the printer, and click OK.

    4. To close the Report Progress dialog box, click the Close button (X) in the top right corner.

    Close the TFS dialog box
    • Click Close.

Was this helpful?