CRANK_xxx

This is a template attribute. Template attributes can be used in filtering, or to retrieve data from the model to use in drawings and reports. For example, when you create a report, Tekla Structures replaces the attributes added in the report template with the corresponding object property values.

Use the following template attributes to show rebar set bar crank information defined by using a rebar set splitter or end detail modifier.

(1) = Location of the splitter


Template attribute	Description
`CRANK_SIDE_START` `CRANK_SIDE_END`	Shows to which side of the splitter the crank is created at the start or end of the bar: `Left` or `Right`.
`CRANK_ROTATE_START` `CRANK_ROTATE_END`	Shows to which angle the crank is rotated at the start or end of the bar.
`CRANK_STRLEN_START` `CRANK_STRLEN_END`	Shows the length of the straight segment of the crank at the start or end of the bar. This is (2) in the image above.
`CRANK_LENTYPE_START` `CRANK_LENTYPE_END`	Shows the type of the cranked length at the start or end of the bar: `Diagonal ratio`, `Diagonal distance`, `Horizontal ratio`, `Horizontal distance`.
`CRANK_RATIO_START` `CRANK_RATIO_END`	Shows the multiplier of the bar diameter that is used to define the cranked length at the start or end of the bar.
`CRANK_DIST_START` `CRANK_DIST_END`	Shows the length of the cranked segment at the start or end of the bar. If the cranked length type is `Horizontal distance`, this is (3) in the image above. If the cranked length type is `Diagonal distance`, this is (4) in the image above.
`CRANK_OFFSET_START` `CRANK_OFFSET_END`	Shows the offset distance of the straight segment of the crank at the start or end of the bar. This is (5) in the image above.