Engineering library (Eurocode Design)

Tekla Tedds
2020
Tekla Tedds Tekla Tedds for Word

Engineering library (Eurocode Design)

The following Eurocode design engineering library calculations have been significantly updated for Tedds 2020.
 

Steel simple connection design (EN1993)

Enhanced to include Fin plate design.

Precast concrete beam design (EN1992)

New calculation which checks the design of rectangular, T, inverted L, inverted T and L beam sections which are subject to major axis bending, torsion and shear. A transverse bending check on the flange outstand and shear between the web and flange are included for T and inverted L beams and a boot check is included for L and inverted T beams.

The calculation allows for the design of a single precast reinforced concrete unit which can be checked at multiple design sections. A lifting check is included where a lower strength of concrete can be selected and various factors added to account for de-moulding and lifting.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Precast concrete column design (EN1992)

New calculation which checks the design of braced and unbraced, slender and non-slender, rectangular and circular precast columns including the effects of biaxial bending if applicable. The capacity of a column splice can also be checked.

The calculation allows for the design of a single precast reinforced concrete unit. Two separate lifting checks are included, where a lower strength of concrete can be selected for factory lifting and various factors added to account for de-moulding, lifting or impact.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Precast concrete wall design (EN1992)

New calculation which checks the design of braced and unbraced, slender and non-slender precast concrete walls.

The calculation allows for the design of a single precast reinforced concrete unit. Two separate lifting checks are included, where a lower strength of concrete can be selected for factory lifting check and various factors added to account for de-moulding, lifting or impact.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Precast concrete stair design (EN1992)

New calculation which checks the design of a precast reinforced concrete straight flight of stairs. The stairs span longitudinally between supports at the top and the bottom of the flight and are unsupported at the sides. Supporting beams are located at the outside edges of the landings.

A lifting check is included where a lower strength of concrete can be selected and various factors added to account for de-moulding and lifting.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Precast concrete half-joint design (EN1992)

New calculation which checks the design of a precast concrete half-joint connection subject to vertical and horizontal forces using a strut and tie model.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Precast concrete bearing design (EN1992)

New calculation which checks the minimum bearing length and design concrete bearing stress and calculates the nominal length of a simple bearing.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

RC nib design (EN1992)

New calculation which checks the design of a reinforced concrete nib connection subject to vertical and horizontal forces.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

RC beam torsion design (EN1992)

New calculation which checks the quantity of torsional reinforcement required, if any, for a solid rectangular concrete section subjected to a combination of direct shear force and torsional moment.

In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia Finland, Norway, Sweden or the recommended Eurocode values.

Video demonstration

Masonry bearing design (EN1996), Masonry bearing design (BS5628), Masonry wall panel design (EN1996), Masonry wall panel design (BS5628)

Enhanced to include Wienerberger's new 500 series Porotherm block range.

See: Porotherm block range.

Crane gantry girder design (EN1993)

New calculation which checks the design of a simply supported gantry girder comprising of either a plain I section, an I section with a capping plate or an I section with a capping channel, carrying a conventional overhead or an underslung travelling crane. In accordance with EN1993 and the national annex for the UK, Singapore, Finland, Sweden, Norway or the recommended Eurocode values.

Watch video demonstration

Batch design

Enhanced to include working examples for the following calculations:

  • Precast concrete beam design (EN1992)

  • Precast concrete bearing design (EN1992)

  • Precast concrete column design (EN1992)

  • Precast concrete half-joint design (EN1992)

  • Precast concrete wall design (EN1992)

  • Precast stair design (EN1992)

  • RC stair design (EN1992)

  • RC beam torsion design (EN1992)

  • RC column design (EN1992)

  • RC nib design (EN1992)

Other enhancements

Other enhancements and corrections have been made to the following calculations, for detailed information about these changes select the "New and updated (Tedds 2020)" group in the Tedds Engineering Library and refer to the preview window.

  • Column base plate design (EN1993)

  • Crane gantry girder design (EN1993)

  • Drain & sewer design

  • Foundation analysis & design (EN1992/EN1997)

  • Masonry bearing design (BS5628)

  • Masonry bearing design (EN1996)

  • Masonry wall panel design (BS5628)

  • Masonry wall panel design (EN1996)

  • RC beam analysis & design (EN1992)

  • RC beam design (EN1992)

  • RC column design (EN1992)

  • RC pile cap design (EN1992/EN1997)

  • RC stair design (EN1992)

  • Reinforcement schedule (BS8666)

  • Retaining wall analysis & design (BS8002)

  • Retaining wall analysis & design (EN1992/EN1996/EN1997)

  • Rolling load analysis

  • Steel 2D analysis & design (EN1993)

  • Steel beam analysis & design (EN1993)

  • Steel member analysis & design (EN1993)

Was this helpful?
Anterior
Siguiente