Tekla Structures 2024 France Environment Release Notes

 

1.1 Environment initialization files

The following advanced options were added, modified or removed from the initialization files :

env_France.ini

role_Acier.ini (Steel role)

role_Béton_Coulé_Sur_Site.ini (Cast-in-Place role)

role_Béton_Planificateur_de_production.ini (Production planner - Concrete role)

role_Béton_Préfabriqué.ini (Precast role)

role_Bois.ini (Timber role)

role_Complet.ini (Full role)

role_Gestion_de_la_Construction.ini (Construction management role)

ByPass.ini

1.2 Catalogs

The following updates have been done to catalogs:

1.2.1 Profiles Catalog

Modified

ArcelorMittal Construction

 

 

 

 

Version 2024 contains new designations in accordance with products solds by ArcelorMittal Construction (August 2023) https://construction.arcelorMittal.com/fr-fr/produits-et-solutions

In yellow new designations and/or classifications

 

 

Updated linear weights  for profiles Frigotherm® 

Modified height for Wall liner trays 500.90 : 90 replaced by 92

 

 

Modified sidings : orientation and inversion width & height

Ateliers 3S

Added collection GLACE range and 3 profiles Bûchette of collection OnWood

 

 

 

 

Laude

Modified sidings : orientation and inversion width & height

 

 

Profil C

Version 2024 contains new designations in accordance with products solds by Profil C https://www.profilc.com/

Sorting is done in Tekla Structures catalog by using following user attributes of profiles catalog

Fabricant (Manufacturer) > [Profile C]

Produit (Product) > [Roofing & cover] [Wall & cladding] [Floor & Structure]

Gamme (Range) >

Série (Series) >

 

 

Attributes and images are displayed in profiles catalog

 

 

Cold profiles also now have designation found on the Profile C site

 

 

Added

Added 2 generic sandwich panel profiles

 

Added specific prefixes TN for black sheet and TG for galva sheet in file profitab.inp

1.2.2 Bolts Catalog
 

Modified

Created new file screwdb_10en10 with removing screws according to the following filters : 

M?[*]?5-*, M??[*]?5-* et M??[*]??5-*

 

NELSON Studs

Updated NELSON Studs with addition of the supplier product code

 

Modified upper D in order to obtain correct head Ø in the model

 

Added

Added bolts  FHC8.8 & 10.9 ZINGUE  ISO 10642

 

Added bolts standards with EN DIN NF standards

 

 

Nota :

In case of Hight-Strength bolt combinations, use of additional washers and/or nuts is not permitted

Hence use of DUMMY_S washers standards and DUMMY_M nuts standards, which do not appear by default in France environment fastener lists

New standards bolts created following information of these sites :

Reyher Site : https://rio.reyher.de/fr/

Wurth Site: https://eshop.wurth.fr/Categories-produits/Vis-Boulons-Rivets-Clous-et-Agrafes/310735.cyid/3107.cgid/fr/FR/EUR/

Emile Maurin Site:  https://fixation.emile-maurin.fr/fr/maurin-fixation/fixation-batiment-et-infrastructure/

Bolts EN 15047-4017 :  Full thread

Bolts EN 15047-4014 :  Half thread

Bolts HV10.9-EN 14399-4 : Hexagonal Head Bolt (screw+nut) - Hexagonal Head Screw

Bolts HV10.9-EN 14399-8 : Adjusted Hexagonal Head Bolt (screw+nut) - Hexagonal Head Reamer Screw

Following old bolts designations will be be removed from French environment in next version Tekla Structures 2025

BOLTE Studs

Added BOLTE Studs

 

HILTI Anchors

New versions and descriptions available

 

Modified anchors HSL4 & HSL4G

 

SPIT Anchors

Added diameters 12 and 14 for anchors SPIT TAPCON HFL XTREM

 

1.2.3 Shapes Catalog
 

Added

Added wahers, nuts and cap nuts

 

1.2.4 Rebars Catalog
 

Modified

The Undefined reinforcements have values ​​by diameter on the tolerances and maximum curves

Warning : rebar_database.inp : Modification of reinforcement bending radius in accordance with the recommendations of NF A035-27 of 25 December 2015

The Eurocode authorizes shorter minimum lengths, based on design justification, which allows only the force present in the bar
This calculation is not carried out in the majority of design offices, which continue to apply fixed values allowing total anchorage of the bar 
Mandrel lengths therefore remain unchanged from the previous version of the catalog, in conformity with BAEL requirements
In accordance with EC2 guidelines, the use of these mandrel radius values implies that the conditions of non-damage to the reinforcement and non-damage to the bar must also be verified

 

Added

Schöck Combar

Added Schöck Combar® glass fibre reinforcements

1.3 Macros

1.3.1 Return Plate

Updated :

• Correct consideration of chamfers if they exist
• Surface treatments do not change of side, they remain in their place
• Trihedron appears to indicate the direction of the plate

 

1.3.2 Plates/Slabs handles rotation

2 new tools to rotate plates/slabs handles (clockwise and counter-clockwise)

 

1.3.4 Book page numbering

Modified in order to have total number of pages in additional to page number

Updated template in consequence

 

1.3.5 Additional information parts

Version 3.1 takes into account welds created with Create a weld to a part and Create a polygon weld            

         

1.3.6  Drawing list info

 

Version 3.1  displays in additional, quantity of assemblies or concrete elements in Document manager  

 

1.3.7 Reopen current model and drawing  

 

Removed French macros in favor of following macos :

• Save And reopenModel
• Open previous model
• Reopen current model without saving
• Save and reopen drawing
• Reopen drawing without saving

 

1.3.8 Reservation symbol

 

Possibility to type symbol rotation angle 

 

1.4 Reports and Templates

Modified all reports and templates because Arial Narrow font is no longer included in Windows 11 by default : Arial Narrow font replaced by Arial font

 

1.4.1 Liste des articles (Shapes report)

Added Finish information and following shapes UDA since Shapes catalog :

Shapes UDA	Designation
SHAPE.Material	Material
SHAPE.ProductWeight	ProductWeight
SHAPE.ProductCode	ProductCode
SHAPE.ShapeDescription	Description

1.4.2 ID_Contrôle Entités IFC (IFC Entities verification report)

New report to find objects whose IFC entity type is not defined 

           

1.4.3 Multi Report Generator

Modified filter record files in the MultiReportGenerator.inp file

 

 

1.4.4 Liste Expédition Multicolonne (MultiColumns Erection report)

New way to manage MultiColumn Erection Report by using columns in the template

 

1.4.5 PDF reports printing

Modified file report.PdfPrintOptions.xml in order to be able to print reports in A3 and A4 (paper size = auto instead of A4)

 

1.4.6 Removed reports

Removed following reports :

B_feuille de coupes,rpt,

ID_Organisateur,rpt,

IFC-MagiCad.xls,rpt,

IFC-Quickpen.xls,rpt,

and IFC-Rhino.xls,rpt

 

1.5 Custom Variables

 

Added filter catalogue_formes with the list of shapes UDA for shapes

1.6 Organizer

Added shapes UDA catalog in property template Articles

Add 4 Excel templates approvisionnement.xlt, débit.xlt, assemblage.xlt & expédition.xlt

1.7 GA Drawings

New layout ensemble_expedition_multi-columns.lay

Only one size now manages multi -columns. Change its height to impact the distribution

 

 File Barcode_g.dat defining composition of barcodes templates for all types of drawings

 Custom.tcProjecturl is used by default

 

 

Added RAL and Trimble Colors Palettes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Updated automatic hatch file general.htc with new predefined materials

 

Updated automatic hatch file cast_unit.htc with new predefined materials (identical to file general.htc) Removed file cast_unit.htc from folders Cast-in-Place and Precast. Now this file is saved in folder General

 

Detailed object level settings for views - Classe : added reference objects

 

Added detailed object level settings ParAssemblage in order to display all parts depending on the main part class

 

Detailed object level settings for views - RAL : to display parts and surface treatments according to RAL finish color

1.8 Drawing DWG Export

Added drawings DWG export ParAssemblage in order to display all parts depending on the main part class

1.9 Objects representation

Updated objets representation RAL

 

2.1 Single-parts drawings properties

Surfacing display in Exact mode in single-part drawings properties ts_Caillebotis and ts_Tole_a_relief     

 

  

2.2 Reports and Templates

2.2.1 Reports

Renamed

Following reports have been renamed :

• E_liste goujon.rpt renamed E_liste connecteurs.rpt (studs reports)

Report oriented in landscape format
Added bolts catalog references for NELSON studs
Added studs other than NELSON (BOLTE for example) modeled as bolts with their bolts catalog references
Added studs modeled as parts (except existing studs) with name or profile containing following texts :

ONNECTE	onnecte	Profils ronds pleins  ou spéciaux
OUJON	oujon
TUD	tud
ELSON	elson

Added studs modeled as items (with same names or profiles than studs modeled as parts), taking into account attributes from the shape catalog :
Material : SHAPE.Material otherwise item Material (except for existing studs)
Product weight: SHAPE.ProductWeight otherwise user attribute Product weight otherwise item weight (calculated taking into account material density and item volume)
Product code : SHAPE.ProductCode otherwise user attribute Product code
Description : SHAPE.ShapeDescription otherwise user attribute Product description

• E_liste boulonnerie.rpt, E_liste boulonnerie.pdf.rpt and E_liste boulonnerie.xls.rpt (bolts reports) renamed E_liste toutes fixations.rpt, E_liste toutes fixations.pdf.rpt and E_liste toutes fixations.xls.rpt (All fasteners reports)

Report E_liste toutes fixations.rpt oriented in landscape format
Report E_liste toutes fixations.pdf.rpt and E_liste toutes fixations.xls.rpt oriented in portrait format
Bolts, additional nuts and washers and screws with EN DIN NF standards are included

Studs :

Added bolts catalog references for NELSON studs
Added studs other than NELSON (BOLTE for example) modeled as bolts with their bolts catalog references
Added studs modeled as parts (except existing studs) with name or profile containing following texts :

ONNECTE	onnecte	Profils ronds pleins  ou spéciaux
OUJON	oujon
TUD	tud
ELSON	elson

Added studs modeled as items (with same names or profiles than studs modeled as parts), taking into account attributes from the shape catalog :
Material : SHAPE.Material otherwise item Material (except for existing studs)
Product weight: SHAPE.ProductWeight otherwise user attribute Product weight otherwise item weight (calculated taking into account material density and item volume)
Product code : SHAPE.ProductCode otherwise user attribute Product code
Description : SHAPE.ShapeDescription otherwise user attribute Product description

Threaded rods modeled as parts : 
Parts with profile beginning with TF- or name containing following texts are taken into account : FILET, Filet or filet
Added rod length (except for existing rods)

Nuts and washers modeled as parts Tiges : 
Parts with name containing following texts are taken into account : ECROU or crou / RONDELLE or ondelle
Exclusion of existing nuts and washers
Items : 
Items with name or profile containing following texts are included :

NCRAGE	ncrage
BARRE	arre
CROSSE	rosse
CANNE	Canne	anne
FILET	Filet	filet
ECROU	crou
ONDELL	ondell
HEVILL	hevill
VIS	Vis	vis
HOLLO	Hollo
IXATION	ixation
RAPAUD	rapaud
TDBL	BOXBOLT

Taking into account attributes from the shape catalog :
Material : SHAPE.Material otherwise item Material (except for existing studs)
Product weight: SHAPE.ProductWeight otherwise user attribute Product weight otherwise item weight (calculated taking into account material density and item volume)
Product code : SHAPE.ProductCode otherwise user attribute Product code
Description : SHAPE.ShapeDescription otherwise user attribute Product description

Screws : Added screws CHC, ETANCO and SPIT TAPCON
Bolts :
Added Tekla Warehouse LINDAPTER (HOLLOBOLT) with their references
https://warehouse.tekla.com/#/catalog/details/8b90205b-d277-4182-a877-776479e3e564
Added Boxbolt bolts with their Product code, Length, Size, Finish and Head type

• ID_Contrôle_Boulons (ID_bolts control report) renamed ID_Contrôle fixations (ID_fasteners control report)

Bolts and screws with EN DIN NF standards are included and following objects modeled as bolts :

Check	Checked object types
Bolts out of part	Bolts	CHC and VABTH screws	Lindapter Hollo-Bolt
	Threaded rods		SFS – TDBL Nonut screws
	Anchors	TAPCON and ETANCO screws	BoxBolt
Specified length Single part bolts Hole Ø < 6 mm Thread in material Slots without washers	Bolts	CHC and VABTH screws	Lindapter Hollo-Bolt
	Threaded rods		SFS – TDBL Nonut screws
	Anchors	TAPCON and ETANCO screws	BoxBolt
No catalog length	Bolts	CHC and VABTH screws
	Threaded rods
		TAPCON and ETANCO screws
Hight-strength bolts without washers	HR and HV bolts

 

Modified

All XSR and PDF reports : added pages numbers - Getvalue ("Page")+"/"+Getvalue ("pages")

Following reports have been modified :

• Ae_liste accessoires pliages enveloppe.pdf.rpt (roofing/cladding accessories)

Landscape orientation instead of Portrait

Added accessories TSBAVETD, TSBAVETE, TSBAVETF and TSCOIFFD

Added characters for fields Title, Title1 and Title 2

Added sort on Location

Added L profiles

Added UDA Interlocking, Interlocking direction, Notching and Reference for all profiles

• Ae_liste appro enveloppe_détaillée.pdf.rpt (detailed roofing/cladding procurement report)

Added characters for fields Project Name, Title1 and Title 2

Added insulation

Updated to take into account the length injected into the RCT_GrossLength attribute

Modified rules for :

-  complete profile and total per profile

- moss removal, facing and coating thickness values

- perforation and condensation regulator information

• Ae_liste appro enveloppe_simplifiée.rpt & Ae_liste appro enveloppe_simplifiée.xls.rpt (simplified roofing/cladding procurement reports)

Added Grade column

• Ae_liste appro enveloppe_simplifiée.pdf.rpt & Ae_liste appro enveloppe_simplifiée.rpt & Ae_liste appro enveloppe_simplifiée.xls.rpt (simplified roofing/cladding procurement reports)

Increased number of characters for Project Name, Title1 and Title 2

Updated to take into account the length injected into the RCT_GrossLength attribute

Modified rules for :

- profile and thickness

- total per profile

Designation column shows Product type and otherwise Part name

• A_feuille de coupes.pdf (Saw list report)

Removed sort on PART_POS for profiles type I, square, rectangular and round tubes and round bars Removed sorts on part names and holes

• A_feuille de coupes.pdf and B_feuille de coupes.pdf (Saw list reports)

Updated image with instructions

Lofted plates, Polybeams and Spiral beams are excluded from 2 reports

• E_liste boulons par phase boulons.rpt and E_liste boulons par phase pièce.rpt (bolts reports by bolts/parts phase)
• E_liste vis.rpt, E_liste vis.pdf.rpt and E_liste vis.xls.rpt (screws reports)
• E_pièces boulonnées.rpt and E_pièces boulonnées.xls.rpt (bolted parts reports)
  Added EN DIN NF bolts and screws standards
• E_trous par pièce.rpt (bolts by parts report)

Added following information :

 - Special holes indication : Slotted or Tappered

 - For Slotted special holes, display of Slotted length maximim

 - For Tappered special holes, pitch direction is displayed

 - For Blind holes, hole depth is displayed

• ID_boulons.rpt (ID_bolts report)

Bolts and screws with EN DIN NF standards are included
Added studs, threaded rods, screws and SFS – TDBL Nonut screws, LINDAPTER (HOLLOBOLT) and Boxbolt bolts

• ID_trou_taraudé.rpt (ID_tapped holes report)

Added following information :
 - Pitch direction
 - Hole type : Blind or Through
 - Hole depth : no value if hole type is Through

 

Added

Following new reports have been added :

• 450 TeklaPowerFab_Part_UserDefined_v1.rpt for the link with TeklaPowerFab
• Ae_liste appro enveloppe_détaillée.xls.rpt (detailed roofing/cladding procurement report)
• E_liste toutes fixations par phase pièce.xls.rpt (All fasteners report by part phase) :

New report. Identical to report E_liste toutes fixations.xls.rpt but with additional sorting by part phase

• E_liste chevilles.xls.rpt (Anchors report)

New report which includes :
- Anchors modeled as bolts with short name containing texts CHEVILLE or Cheville or cheville
- Items with name or profile containing texts CHEVILLE or Cheville or cheville

• E_liste Lindapter Hollo-Bolt.xls.rpt (Lindapter Hollo-Bolt report)

New report which includes :
- Bolts Lindapter Hollo-Bolt modeled as bolts with short name beginning with Lindapter or HOLLOBOLT
- Items with name or profile beginning with HOLLO or Hollo

• E_liste SFS Vis nonut TDBL.xls.rpt (SFS Vis nonut TDBL report)

New report which includes :
- Screws SFS Vis nonut TDBL modeled as bolts with bolt standard containing text TDBL
- Items with name or profile containing text TDBL

• E_liste tiges filetées.xls.rpt

New report which includes :
- Threaded rods modeled as bolts with T-FILETEE standard, with nuts and washers required
- Threaded rods modeled as parts (profile beginning with TF- or name containing following texts: FILET, Filet or filet
- Items with name or profile containing following texts :

FILET	Filet	filet
ECROU	crou
ONDELL	ondell

 

Removed

Following reports have been removed :

• E_liste écrous.rpt (nuts report)
• E_liste_rondelles.rpt (washers report)
• E_liste vis.csv.rpt (screws report)
• ID_trou_hors_piece.rpt (ID_holes out of parts report)
• ID_trou_seul.rpt (ID_holes alone report)

 

 

2.2.2 Templates

Modified

• graphique_atelier.tpl :

Modified because if non-solid items (such as studs) were welded, template displayed TO BE ERECTED instead of TO BE ASSEMBLED

 

2.3 NC files in DSTV format

Machine 1 (flats).ncfs

Modified option Maximum diameter of circular cuts to drill = 60 > 0            

2.4 Custom Variables

Added following variables :

Name	Type	Row Type	Description
CUSTOM.POWERFAB_SHAPE_FR	String	Part	Returns catalog maufacturer name (without space) If empty, does not return anything For profile plates or contour plates, check in file fltprops.dat, if profile or contour plate and returns PL or TOLE
CUSTOM.POWERFAB_DIMENSION_FR	String	Part	Returns profile name. For plates returns thickness x width
CUSTOM.CUSTOM.POWERFAB_SUBASS_FR	String	Part	Returns assembly pos in level N+1 if part belongs in a sub-assembly

Modified custom variable CUSTOM.HAS_STUDS_FR, which determines whether parts have studs. Previously it filtered on the name of the standard, now it looks for whether the part's bolts have CONTENTTYPE equal to STUD

Modified selection and view filters with custom variables for parts

 

Added custom_soudures_fr selection and view filters which list custom variables CUSTOM.WELD_LENGTH_INT1 and CUSTOM.WELD_LENGTH_INT2 for welds

         

 

2.5 File objects_RoofingCladding.inp

Added Cladding Profile / Panel, Roofing Profile / Panel, Insulation and built-up roofing for Product type

Added Interlocking and Interlocking direction for Accessories

Added free user attributes for IFC mapping

2.6 AdditionalPSets

Added free user attributes for IFC mapping in property set Enveloppe.xml

 

3.1 Modeling

Added save as files for sheet piles in Roofing Cladding Tool extension

 

3.2 Drawings

Added beams representation and beams marks settings

3.3 Reports

Modified concrete reports in order to better display quantities and sub-assemblies

 

3.4 Custom Variables

 Added following variables :

Name	Type	Row Type	Description
CUSTOM.WALL_OPENING_BOTTOM_LEVEL	Distance	Part	Level of the bottom edge of the opening in the current coordinate system
CUSTOM.WALL_OPENING_TOP_LEVEL	Distance	Part	Level of the top edge of the opening in the current coordinate system
CUSTOM.WALL_OPENING_BOTTOM_LEVEL_GLOBAL	Distance	Part	Level of the bottom edge of the opening in the global coordinate system
CUSTOM.WALL_OPENING_TOP_LEVEL_GLOBAL	Distance	Part	Level of the top edge of the opening in the global coordinate system
CUSTOM.WALL_OPENING_TOP_EDGE_DISTANCE	Distance	Part	Distance from the top edge of the opening to the top edge of the part
CUSTOM.WALL_OPENING_BOTTOM_EDGE_DISTANCE	Distance	Part	Distance from the bottom edge of the opening to the bottom edge of the part
CUSTOM.WALL_OPENING_HEIGHT	Distance	Part	Height of the opening
CUSTOM.WALL_OPENING_WIDTH	Distance	Part	Width of the opening
CUSTOM.REBAR_IS_VALID	Integer	Rebar	Returns 1 if the bar has weight and length greater than zero and if the bar has valid geometry
CUSTOM.FATHER_PART	String	Rebar	Provided the GUID of the bar's father part

 

Modified following selection and view filters with custom variables :

For cast units

 

For rebars

 

4.1 Import Export Phases

https://warehouse.tekla.com/#/catalog/details/9be3fa20-3e2e-446d-a2e0-4bdc3d086ef5

Added file Import Export Phases_Att_Utilisateur.cs

Variant for exporting and importing additional UDA in the phase list

4.2 Bolts Manipulator

https://warehouse.tekla.com/#/catalog/details/bdcb6a7c-b213-44d1-9f27-9062b51ab819

Holes on the opposite face : Taking into account Dx, Dy and Dz ends offsets of the original bolts

4.3 Combine Polybeam (Combiner Polypoutre)

https://warehouse.tekla.com/#/catalog/details/5439c3f9-18ba-4b4f-9194-ae40a9f1352d

Possibility to use either component Cranked beam (41) , either Fit beams and colums with polybeam explode option

4.4 Custom component Threaded Rod (Tige filetée V2)

https://warehouse.tekla.com/#/catalog/details/u19fd6452-1015-484f-9c90-5d4fd769f7ff

Added version 2 which uses items for washers, nuts and cap nuts

Possibility for holes to use circular cuts or holes created with Bolt command

4.5 Filter Acier including materials ALUMINIUM, 10.9, 8.8, 6.8 and 4.6

https://warehouse.tekla.com/#/catalog/details/3d8865d2-c91b-4a5e-b69c-13682e16e3b8

Filter Acier including materials ALUMINIUM or 10.9 or 8.8 or 6.8 or 4.6 for single-part and assemby drawings creation with Tekla_Croquis_Auto wizard

 

4.6 HUURE

https://warehouse.tekla.com/#/catalog/details/03102ce1-599a-4988-b1dc-bdd1e47b15e4

https://www.huurreiberica.com/index.php/en/. Added profiles for cold room

 

4.7 Isocab By Kingspan

https://warehouse.tekla.com/#/catalog/details/270dd184-5374-4356-bc0e-31089a55d1b5

https://www.isocab.com/gb/en/. Added insulating sandwich panels

 

4.8 Roofing/Cladding Accessory

 https://warehouse.tekla.com/#/catalog/details/2fc16edc-1e52-48bb-b7b1-4efa26cf3f77

List of shapes : numbers list replaced by a list with shapes direct choice

 Shapes choice : updated drop-down menus for shapes choice

 

Three head flashing : for the last three head flashing, third option added for choosing a horizontal face at the top of the shape

 

 

 

 

Added option for parapet wall flashing : new option for choosing between the existing TSCOIFFA profile and the new TSCOIFFD profile

Added UDAs for notching and interlocking : E_NOTCHING, E_INTERLOCKING...

 

Modified file RoofingCladding_acc.inp : 

First tab	Main image Fr_acc_01a.bmp replaced by image Fr_acc_50.bmp
First tab	Six numbers list replaced by shapes list. (value("01", 1) ‐> value("Fr_acc_51a.xbm", 1), …)
Six tabs	Images in the list replaced by shapes different selection . (Fr_acc_04a.xbm ‐> Fr_acc_52a.xbm, …)
Tab 01	Third option on the last three head flashing (parameters C02A, C02B and C02C)
Tab 02	New parameter E50 with two options for choosing between TSCOIFFA and TSCOIFFD
Tab 02	2 new parameters E51 and E52 for length and angle for additional face of the TSCOIFFD shape (+ corresponding texts)
Tabs 01 and 02	Texts added for new shapes TSCOIFFD, TSBAVETD, TSBAVETE and TSBAVETF
Several tabs	Tests created for displaying or not new option, different parameters and texts

File RoofingCladding_acc.dat: Four new shapes added with default parameters

File standard.p_Accessoire Enveloppe : 3 new parameters added E50, E51 and E52

 

4.9 Roofing Cladding Tool

https://warehouse.tekla.com/#/catalog/details/4c56988c-9f02-4f59-8fc6-866dc12e825a

 

Warning: due to a large number of changes, do not install over a 1.6 during one project !

Redo your registrations for future cases/versions of 1.7.1.

 

Support for different languages, in particular for user attributes. File object_enveloppe.inp initially installed in folder ..\Environments\France\General\model_settings was replaced by file objects_RoofingCladding.inp installed in folder ..\Environments\common\inp

 

Added entities IFC and Sub-Types (IFC4) in all saved files

 

 

New launch function for defining the plane (Face selection or Defined by 3 points)

 

Layer tab : Location option (corresponding to UDA [E_LOCATION]) is now in this tab and is automatically applied to all layers

 

Layout tab:

Picking functions can be used to define tray junction locations without having to enter values.

 

A cell to prevent the tool from creating elements below a certain length. In the case of overlaps in the opening area, these small elements will not be created if their length is less than the value entered.

 

Contour tab :

New CUT function enables polygonal cutting on the edges (e.g. in the case of black cladding) or inside the contour (shapes different from rectangular openings)

 

New contour edge options for calculating lengths : an attribute RCT_GrossLength is filled in the last cases. It can then be retrieved from lists and drawings

 

 

Envelope tab :

Added attribute Drain defoaming value

 

Envelope(more) tab :

A series of 20 free attributes, enabling you to map any additional property sets you may require to the needs of your building sites

 

4.10 CFA

https://warehouse.tekla.com/#/catalog/details/8e87b0bf-8ad4-431d-8aec-30aa83cf0d16

Many fixes ans improvements

Construction lines are removed

Section tab :

Rebars quantity (0,1,2) and ties creation (Yes, No) can now be set

 

 

Hooks are removed in the case of a hook angle equal to 0

Distance between layers 2 and 3 can now be modified when 3 layers are requested. This is distance between bars (not center-to-center distance)

 

 

New ties distribution parameter (Auto, manu). When using ties, distribution is calculated automatically or manually by entering distance

 

 

Shape U exceeding option :

Distance between Tie top and U top is defined by using this parameter

 

 

Dimension modified in picture and one note added

 

 

Parameters tab :

New surface treatment creation parameter (3 sides, top, none)

 

 

New hook properties parameters (origin and end). In the case of special hooks, angle, radius and length are requested

 

 

Shape U exceeding is defined by using this parameter

 

 

4.11 Vertical reinforcement (Chaînage vertical)

https://warehouse.tekla.com/#/catalog/details/cf4c4db5-35a5-4976-837a-47fb1565839a

 

Do not import this new version into an existing model --> Reinforcement may be modified

Wall reinforcement component updaated :

Bars distributions fixes and improvements (target or fixed,  last U value)

Automatic cover taken into account

 

 

4.11 Openings and reservations (Ouvertures et réservations)

https://warehouse.tekla.com/#/catalog/details/u65aad9e5-0d0f-446e-a172-657b8e3f7fc7

Do not import this new version into an existing model --> Reservations may be moved

 

Added reservation offset option relative to insertion point

Added reservation position Ai, Axe or As relative to offset value

Added formwork element class