Mesh bars: The cover thickness for meshes is now distributed more consistently.

Corner bolted gusset (57): Previously, there was the clash between the stiffeners and the main or last secondary parts in some cases. This issue has now been fixed.

Corner bolted gusset (57): Previously, some welds between the gusset, main part, last secondary part, and stiffeners were created incorrectly. This issue has now been fixed.

Bent shear plate (48): Previously, bolt slotted hole properties were not correctly applied. This issue has now been fixed.

Tapered column-beam stub (150): Previously, the component was not working for a main part wider than 1000 mm. This issue has now been fixed.

Kingspan Cold rolled sleeved (28): When the Bolt on Cleat Centre option is set to 50 or 60, the bolts are now a 55 mm backmark.

Ayrshire File transfer (92): Previously, the CAM data was incorrectly using the label PURLIN in the ProductType for all Zed and Zeta sections.

Reference model positioning: Previously, if an IFC2x3 reference model contained extensive information before the schema definition at the beginning of the file, the IFC schema detection would fail during the reference model insertion. This resulted in the incorrect positioning of the IFC2x3 reference model. This issue has now been resolved.

Template Editor: In the value field properties, if you set the Data type to Text, the Unit value was reset. This issue has now been fixed, and the Unit value is no longer reset.

Template Editor: Previously, color indexes were imported as RGB values during the DWG import. Now they are imported as color indexes, which is the correct way. As a result, black color (RGB 0,0,0) is converted to white when black drawing background is in use.

Previously, some washers and nuts were missing from the reports. In specific cases where the bolt standard or bolt name was not prioritized in the combining order, washers or nuts were not included in the reports. This issue has now been fixed.

View-specific dimensioning: Recess and hole dimensions are now created faster than before.

Previously, selecting parts by the selected multi assembly drawing selected all parts shown in the drawing. Now, similarly to earlier Tekla Structures versions, only parts or assemblies with positions used to create the multi assembly drawing are selected.

In some cases involving complex, curved geometry, unwanted circles could appear in drawings, especially after selecting drawing objects, zooming, or reopening the drawing. This issue has now been fixed.

Section Mark X & Y text offset: When you tried to type in a value, it automatically changed to something else. This issue has now been fixed, and you can type in values normally.

Annotations: It was sometimes very slow to select and move a large number of annotations that contain a template with custom properties. The performance has now been improved, and selecting and moving annotations is faster.

A critical error sometimes occurred when you tried to change the color of an object in a Tekla Structures drawing. This issue has now been fixed.

Previously, when selecting dimensions in a drawing, unexpected canceling dialog flickering appeared. This issue has now been resolved.

Drawing image path: The drawing property pane folder browser for images works correctly now. Earlier, an incorrect path might be displayed when you double-clicked any image in a drawing.

A Tekla Structures application error occurred when you opened some drawings. This issue has now been fixed.

Dragging polylines in drawings could sometimes cause Tekla Structures to freeze. This issue has now been fixed.

Drawing hatches: Selecting a hatch for a drawing sketch object, such as a rectangle, did not always work. This issue has now been fixed.

Rebar sets: An issue has been fixed where the Split offset value was sometimes incorrectly applied to a splitter placed on or near a leg face edge.

Curved items, such as ramps, no longer display graphical issues when they are native objects or reference objects.

Fillet edges are now displayed with improved performance. You can control the showing and hiding of the edges through the settings.

Area selection from left to right does not select the underlying part anymore if the whole part is not included in the area selection.
 

Earlier, in certain situations when adding weld preparation or edge chamfers to a part with holes, holes disappeared from the part. This issue has now been fixed.

Previously, parts with fillet edges were lost when the model view was redrawn after drawing creation. This has now been fixed.

Small or thin objects no longer appear overly bright when zooming out in rendered model views.

Trimble Connect: Previously, when you started Trimble Connect collaboration, the list of projects was sometimes empty. Now the reporting of failures when the list of projects is fetched has been improved.

An earlier problem that caused model objects to have duplicate IFC entries in the property pane has now been fixed.

When you select an anchor rod created from a base plate detail in the model view, the Anchor property pane shows shows the properties of the anchor rod in the side pane.

Previously the profile validation function in the Anchor property pane only accepted profiles starting with "D" or "ROD" as valid profiles in the profile field. If you tried to change the profile to one that did not start with these characters, such as AB1/4 or AB1/2, Tekla Structures prevented the change and it was not possible to modify the anchor.

Now the profile validation function in the Anchor property pane accepts other profiles as valid. It is now possible to use type AB1/2 in the profile field and modify the anchor from the property pane.
 

Earlier, a bolt head was always shown, even for bolts that had no bolt head diameter specified. Now, a bolt head is not shown if bolts do not have a bolt head diameter specified.

Previously, when you copied properties from a timber object that had been added by the timber object extension, Tekla Structures might have stopped working unexpectedly. This has now been fixed.
 

Import from Tekla Structural Designer: The end forces in the part user-defined attributes (UDAs) have been corrected so that they take into account the sign convention changes to the force data stored in the Tekla Structures analysis database.

An issue has been fixed where the automatic grouping of rebar set bars incorrectly grouped different bars together and this led to incorrect numbering. This problem occurred only if the Bars affected property of splitters, end detail modifiers, or property modifiers was set to a value other than 1/1. Additionally, the presence of a hole or such feature that changed the number of bars in a bar plane contributed to the problem.

DSTV/NC: Previously, contour marking was not created correctly for short contour lines, which caused identical parts to have different numbers. This issue has now been fixed.