2022 SP7: Mejoras y correcciones importantes

Tekla Structures
2022
Tekla Structures

2022 SP7: Mejoras y correcciones importantes

En Tekla Downloads están disponibles la última versión de servicio de Tekla Structures y los instaladores de entorno actualizados.

Exportación IFC4: nueva opción para seleccionar el sistema de exportación de punto base adecuado

Ya puede seleccionar el sistema que se usará cuando exporte a IFC4 y la ubicación se base en un punto base. Si ha definido un punto base para Ubicación por en el cuadro de diálogo Exportación IFC4, puede usar la nueva configuración Exportación punto base, con el fin de asegurarse de que la colaboración funcione con otras partes del proyecto. Las opciones que hay disponibles son IfcMapConversion y Sistema coordenadas IfcSite.

IfcMapConversion convierte el sistema de coordenadas local del modelo en el sistema de coordenadas global, y es necesario cuando se requiere el formato IFC4 que cumple el esquema IFC4.

Sistema coordenadas IfcSite convierte las coordenadas del modelo IFC de cada objeto independientemente y puede utilizarse para crear un archivo IFC4 que se pueda ver en la mayoría de los visualizadores de IFC, como Trimble Connect. En la exportación IFC2x3 también se usa el mismo método de conversión.

TTSD-53708

Mejora en el uso compartido de las versiones de dibujo en Tekla Model Sharing

Antes, no funcionaba del modo previsto el uso compartido de versiones de dibujo en Tekla Model Sharing y las versiones de dibujo se perdían al escribir. Las versiones de dibujo ahora no se borran cuando se escribe. Asimismo, con opciones avanzadas se puede controlar el borrado de archivos de dibujo innecesarios.

El funcionamiento del control de si se borran los archivos de dibujo innecesarios es igual que con los modelos multiusuario. Use la opción avanzada XS_DELETE_UNNECESSARY_DG_FILES para definir si se borran los archivos de dibujo innecesarios y XS_​DELETE_​UNNECESSARY_​DG_​FILES_​SAFETY_​PERIOD para definir el intervalo de tiempo que, una vez transcurrido, se borran los archivos de dibujo innecesarios.

Si define XS_DELETE_UNNECESSARY_DG_FILES como TRUE, los archivos .dg con más de 7 días (el periodo de seguridad por defecto) se borrarán de su modelo local y de otros usuarios del mismo modelo. Con la opción avanzada XS_DELETE_UNNECESSARY_DG_FILES_SAFETY_PERIOD se define el tiempo que los archivos de dibujo están guardados. El periodo de seguridad por defecto es 7 días.

TTSD-38119

Correcciones

Número de defecto Área de desarrollo Descripción
TSAC-7031 Concrete components

Rebar coupler and anchor tools: The Extra fabrication length values are now written to the correct user-defined attributes.

TSAC-7001 Steel components

Ayrshire Diagonal tie - column (81), Ayrshire File transfer (92): Previously, there was an application error when connecting the diagonal brace to a column or rafter. This issue has now been fixed.

TSAC-7123 Steel components

Ayrshire Eaves beam to stanchion (113): The Welds tab for this component has been removed.

TSAC-7007 Concrete components

Braced girder (88): Previously, girders were not created correctly if there was a cutout or a partial cutout on one or both of the side edges of the main part. This issue has now been fixed.
 

TSAC-4203 Concrete components

Braced girder (88): Previously, the braced girder was not split and it did not continue when it reached the recesses. This issue has now been fixed.

TSAC-7154 Steel components

BW Mezzanine floor connection (39): Previously, the default profile used was incorrect, and the cleat thickness option did not work. These issues have now been fixed.

TSAC-6637 Steel components

Clip angle (141): Previously, the vertical bolt edge distance was not correctly applied in some cases. This issue has now been fixed.
 

TSAC-7236 Steel components

Clip angle (141): Previously, the vertical position of bolts was affected by the notch cuts in the secondary part. This issue has now been fixed.

TSAC-7093 Steel components

CMF Side rail supports (28): Previously, when using CMF Non-continuous rail (106) to attach rails in between the column webs, if the cut back of the cold rolled was too great, CMF Side rail supports (28) was not applied. This issue has now been fixed.

TSAC-6806 Steel components

Column with stiffeners W (182): Previously, the strip to the secondary part flange did not work when the secondary part was connected to the main part web. This issue has now been fixed.

TSAC-6127 Concrete components

Concrete console (110): Previously, the hole position was not correct in the neoprene when it was placed under a sloped beam. This issue has now been fixed.
 

TSAC-5960 Concrete components

Concrete console (110): The polygon cut to cut the column is now created properly with sloped beams.

TSAC-7039 Concrete components

Concrete foundation (1030): The height level of the inner tube rebar is now properly defined.

TSAC-6628 Concrete components

Corbels and recesses (82): Recess positioning for cut parts has been improved.

TTSD-53989 Drawings

Drawing context menu: Now the context menu in drawing mode is updated and shown correctly when you click the model view while editing a drawing and then return back to the drawing. Earlier, the context menu was empty in this case.

TSAC-7035 Concrete components

Electric box in wall (84): Sometimes, when you changed the connection used between the electric parts and the panel, the result assembly of the parts was broken. This issue has now been fixed.
 

TTSD-55092 Concrete components

Embedded anchors (008): Earlier, when using a component for creating anchors in the Embedded anchors (008) component, there could be an application error in Tekla Structures. This issue has now been fixed.

TSAC-7176 Concrete components

Embedded anchors (008): Numbering now works properly for the extra insulation part.

TSAC-7179 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Now height is also exported for user-defined profiles.

TSAC-7290 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Previously, the export of elements with complex geometry did not work correctly. This issue has now been fixed.

TTSD-55693 Drawings

Fabrication drawings: Sorting by multiple columns now works in the Creation review dialog box.

TTSD-51846 Drawings

Fabrication drawings: The Creation review dialog box now handles the existing drawings more reliably.

TTSD-51835 Drawings

Fabrication drawings: The Creation review dialog box now remembers the states of the check boxes better.

TTSD-55379 Drawings

Fabrication drawings: The Creation review dialog box was listing some setting files that were not drawing setting files. This issue has now been fixed.

TTSD-52695 Drawings

Fabrication drawings: The Creation review dialog sometimes showed the same drawing settings twice. This issue has now been fixed.

TSAC-5988 Steel components

Haunch (40): Main part stiffeners are now created correctly when the column profile has flange slope ratio.

TTSD-55485 Import, export, interoperability

IFC object conversion: The conversion results are now better with certain IFC models containing nested IFC boolean results (adds or cuts).

TTSD-54476 Import, export, interoperability

IFC2x3 export: Due to some invalid fittings, the IFC2x3 export behaved incorrectly when trying to apply these fittings in a certain base point use case. Now invalid fittings are ignored in the IFC2x3 export.

TTSD-55101 Import, export, interoperability

IFC4 export: Boolean type (TRUE/FALSE) of user-defined attributes are now exported correctly.

TTSD-55134 Import, export, interoperability

IFC4 export: With the Export flat wide beams as plates setting, plates were sometimes exported to wrong location. This issue has now been fixed.

TTSD-54901 Import, export, interoperability

Import from Tekla Structural Designer: Concrete grade 2500 psi is now included in the Tekla Structural Designer import material mapping. It is imported with the warning "Materials were auto-created: 2500 Concrete".

TSAC-7223 Steel components

Joining plates (14): Previously, when the angle between the main and secondary part was small, the component did not work correctly. This issue has now been fixed.

TSAC-7299 Concrete components

Lifting anchor (80): Previously, lifting anchors were not created properly when created on an inconsistent assembly. This issue has now been fixed.

TTSD-55218 Import, export, interoperability (steel)

NC/DSTV: Certain weld preparations were not created correctly for I beam flanges when the flange had cuts that made the ends non-rectangular. Now the weld preparations are created correctly in this case.

TTSD-8330 Organizer

Organizer object group (.OrgObjGrp) files can now be read from the subfolders of firm or project folders in the Organizer category properties dialog box.

TTSD-55036 Import, export, interoperability

Point clouds: The point cloud location was not modified and saved correctly in a specific use case, which has now been fixed.

TTSD-55047 Drawings

Print drawings using Printer Catalog printer instances (old printing): Printing in gray scale now works.

TSAC-6294 Steel components

Railings (S77): Previously, only 99 vertical rails were welded to the main part. This issue has now been fixed and all rails are welded correctly to the main part.

TSAC-7220 Steel components

Seating (39): Previously, only one pair of stiffeners was created for some of the main part profiles. This issue has been fixed, and two pairs of stiffeners are now created.

TSAC-6308 Steel components

Seating cap plate (2): Previously, the horizontal offset of the lower cap plate was not correctly applied. This issue has now been fixed.

TSAC-7201 Steel components

Shear plate simple (35): Previously, the assembly position and start number were incorrectly applied for the shear tab. This issue has now been fixed.

TSAC-7030 Steel components

Steadmans Mezzanine inset cleat (121) is a new inset cleat connection for the mezzanine floor range of beams.

TSAC-7240 Steel components

Stiffened end plate (27): On the Parts tab, you can now select whether the front plate is moved in column to beam connections.

TSAC-6115 Steel components

Stiffened end plate (27): The default value of the front plate height is now the same as the end plate height in the column to beam connections.

TSAC-6306 Steel components

Stiffeners (1003), Multiple stiffeners (1064): Previously, weld preparations were always created. This issue has now been fixed.

TPLED-269 Templates and reports

Template Editor: When you panned the template work area with the mouse, the selection handles were drawn with the background color and the handles were invisible. This issue has now been fixed.

TSAC-7118 Steel components

Tensioner (7): Previously, the component did not work correctly for one secondary part. This issue has now been fixed.
 

TTSD-55855 Import, export, interoperability

Trimble Connect: Property sets for rebar sets were previously not exported to Trimble Connect when you used the Upload model command. This issue has now been fixed.

TSAC-7148 Steel components

Two sided clip angle (143): Previously, the vertical position of bolts was affected by the notch cuts in the secondary parts. This issue has now been fixed.

TSAC-7303 Steel components

U.S. Base plate (1047): Previously, the cuts to create finger shim plates were not positioned correctly. This issue has now been fixed.

TSAC-6955 Steel components

UltraZED File transfer (93): Previously, manually adjusting the length of a diagonal restraint after they had been inserted with a component resulted in incorrect CAM data as it would not update. Now, the Tekla Structures displays a warning message, and requests drawings.

TSAC-7229 Drawings

View-specific dimensioning: The Filter dimensioning option Only objects on the selected sides did not work when the secondary parts contained cuts, and the filter did not contain an Object type row. This issue has now been fixed.

TSAC-7264 Drawings

View-specific dimensioning: The dimensioning method Filter with the rule option Only objects on the selected sides did not work for bolt groups. This issue has now been fixed.

TSAC-6979 Drawings

View-specific dimensioning: The drawing dimensioning method Filter did not work correctly in skewed cases when dimensioning custom components as secondary objects. This issue has now been fixed.

TSAC-7175 Drawings

View-specific dimensioning: When the dimensioning method Filter was used for skewed edges and the cast unit consisted of several parts, the dimension start and end points were not always placed correctly. This issue has now been fixed.

TSAC-7352 Concrete components

Wall to wall connection: Connectors are now placed correctly.

TTSD-53541 Drawings

Adding an associative note for the selected part did not work correctly if you picked the leader line positions outside the drawing view. This issue has now been fixed.

TSAC-7266 Templates and reports

CUSTOM.HC_SAWINGS_END_N now returns the correct number of individual sawing lines for the end cuts at every angle.

TSAC-7242 Drawings

Drawing dimensioning now works in a rebar assembly that is added to a hierarchical cast unit, for example, to a double wall. Previously, no dimensions were created.

TTSD-54698 Drawings

Earlier, in neighbor parts with bolt holes, circular holes could get a slotted hole mark. This issue has now been fixed.

TTSD-54819 Drawings

Earlier, when inserting or modifying marks with the advanced option XS_ENABLE_REBAR_MARK​_LEADER_​LINE_BASE_​​POINT​_OPTIMIZATION set to TRUE, the base point optimization was also done for other types of marks than rebar marks. This issue has now been fixed.  

TTSD-55192 Modeling

Earlier, when performing operations that required unfolding of lofted plates consisting of several close to parallel polygon sections, for example, inquiry or export to IFC4, there was an application error in Tekla Structures. This issue has now been fixed.

TTSD-54388 Tekla Model Sharing

Now, in Tekla Model Sharing, drawing files are restored if the .dg files have been accidentally deleted. Deleted drawings are copied to the ModelSharing\BackUpEnv folder and are checked against to the drawings on the Drawing list. The .dg files are read automatically from the BackUpEnv folder when another user reads in the packet that has been written out after the drawing deletion.

TTSD-54170 Modeling

Previously, if multiple parts were selected and one of the parts had a parametric profile, the profile was shown as invalid in the property pane. This now has been fixed.

TTSD-55138 Modeling

Previously, if you tried to cut surface treatment by the part it was attached to, Tekla Structures might have unexpectedly stopped working. This issue has now been fixed.

TTSD-54331 Modeling

Previously, in some rare cases, when assemblies with and without bolt holes were compared, Tekla Structures might have stopped working unexpectedly. This has now been fixed.

TTSD-55926 Core

Previously, in some rare situations, Tekla Structures might have stopped working unexpectedly when pressing F1. This has now been fixed.

TTSD-54524 Tekla Model Sharing

Previously, reading in the sharing changes was sometimes extremely slow if the model contained a large number of custom components that had been duplicated from plugin components with an identical name. A warning dialog box was shown, and you had to click the OK button multiple times on the dialog box to pass the warnings and being able to continue.

Now, the components are no longer automatically updated when you read in. This results in faster performance and fewer false modification conflicts, and no warnings are shown. 

TTSD-54716 Modeling

Previously, when modeling and then inquiring negative hole tolerances, the HOLE_TOLERANCE template attribute returned 0 instead of the actual value. This issue has now been fixed.

TTSD-55058 Reinforcement

Rebar sets: If you switch the work plane from the global origin and then create rebar sets using the By guidelines command, the current work plane is now taken correctly into account and the rebar sets are placed correctly.

TTSD-55128 Reinforcement

Rebar sets: It was not possible to create a modifier or secondary guideline with more than two points in multi-point picking mode if Follow edges was set to Yes. This issue has now been fixed.

TTSD-41794 Reinforcement

Rebar sets: The commands Create 3D view and Zoom now work properly with rebar set modifiers. The work area around the selected rebar set modifier is now defined correctly.

TTSD-54965 Reinforcement

Rebar sets: When Follow edges was set to Yes, bars were not created to all faces of a part if the part collided slightly with another part. Tekla Structures was not able to find suitable edges to follow in these cases. This issue has now been fixed.

TTSD-54053 Reinforcement

Rebar sets: You can no longer use the By guidelines command with pour objects or add leg surfaces to existing rebar sets in pour views.

TTSD-52195 Templates and reports

Tekla Structures stopped responding when a template tried to output a single row that was defined to use columns that started from bottom left or bottom right. This issue has now been fixed.

TSAC-7017 Steel components

The Auto bolt component used in custom components now supports the following data types for the BoltSize attribute: bolt size, length, double, and string. The component can also be modified while being a part of custom component, in the user interface, without any unexpected results. The stand-alone Auto bolt component works the same way as previously.

TTSD-55089 Import, export, interoperability

The following missing IFC entities have been added in the IFC entity list and in the IFC4 and IFC2x3 export:
IfcBeam (added for assemblies, cast units, and pour units)
IfcChimney (added for assemblies, cast units, and pour units)
IfcColumn (added for assemblies, cast units, and pour units)
IfcFooting (added for assemblies, cast units, and pour units)
IfcMember (added for assemblies and cast units)
IfcPile (added for assemblies, cast units, and pour units)
IfcPlate (added for assemblies and cast units)

TTSD-55474 Import, export, interoperability

The IFC4 API in 2022 was changed in 2022 SP6 (IFCExportFlags), which needed a rebuild of the external applications executing the IFC4 export. This change is now reverted so that the external applications work again without the need of a rebuild.

TTSD-55680 User interface

The ribbon menu commands for Create fabrication drawing are now correctly disabled if there is no model open.

TTSD-55524 Modeling

When using Building hierarchy in the model, the Fit work area to selected parts context menu command now correctly zooms to parts when the selection is done with Ctrl+A.

TTSD-54937 Import, export, interoperability

Where Tekla Structures 2022 SP6 and Tekla Structural Designer 2022 (any service pack) were installed on the same computer and the direct link was used for importing or exporting, the import or export process failed.
This issue has now been fixed in this service pack for Tekla Structures. There is no need to install a different service pack for Tekla Structural Designer 2022.

¿Le ha resultado útil?
Anterior
Siguiente