Formatos de archivo y software compatibles con Tekla Structures
En las tablas siguientes se enumeran las posibilidades de interoperabilidad de Tekla Structures.
La lista Formatos de archivo compatibles incluye los posibles formatos de archivo para la importación y exportación en Tekla Structures.
Las listas de software compatible incluyen el software compatible con Tekla Structures.Algunos de los programas de software enumerados tienen un enlace directo con Tekla Structures.Hay disponibles varios enlaces directos en Tekla Warehouse.
Formatos de archivo compatibles
Puede importar y exportar varios formatos en Tekla Structures.
En la tabla siguiente se enumeran muchos de los distintos formatos que se pueden utilizar en Tekla Structures para la importación y la exportación de datos.
Para utilizar algunos de los formatos, debe descargar una extensión de Tekla Warehouse.
|
Formato |
Importar |
Exportar |
|---|---|---|
|
Imagen 3D (.obj) |
X |
|
|
aSa (.TEK) |
Cantidades de armadura y geometría de producción para corte y plegado |
|
|
Autodesk 3DS Max format (.3ds) |
X |
|
|
Autodesk (.dwg) |
Geometría 3D, geometría 2D |
Geometría 3D, geometría 2D, dibujos |
|
Autodesk (.dxf) |
Geometría 3D, geometría 2D |
Geometría 3D, geometría 2D, dibujos |
|
Bentley ISM |
X |
X |
|
BIM Collaboration Format (.bcf) |
X |
X |
|
Archivos Blender (.blend) |
X |
|
| BricsCAD (.ifc) |
X |
X |
|
BVBS (.abs) |
Cantidades de armadura y geometría de producción para corte y plegado, malla, viga en celosía |
|
|
CIS/2 LPM5/LPM6 análisis (.stp,.p21,.step) |
Geometría 3D |
Geometría 3D |
|
CIS/2 LPM5/LPM6 diseño (.stp,.p21,.step) |
Geometría 3D, atributos
|
Geometría 3D, atributos
|
|
CIS/2 LPM6 fabricación (.stp,.p21,.step) |
Geometría 3D, atributos |
|
|
CPIxml |
Cantidades, datos de materiales, datos de estado |
|
|
COLLADA (.dae) |
X |
|
| .csv | Geometría de parte y conjunto para fabricación, atributos | |
|
DSTV (.nc,.stp,.mis) |
Geometría analítica 3D |
Datos de parte para fabricación |
|
EJE |
X |
|
|
Elematic ELiPLAN, ELiPOS (.eli) |
Fechas y estado de producción |
Cantidades de elementos y materiales, geometría de producción para colada, ploteo y corte, notas y estado de diseño |
|
EPC |
X |
|
|
Fabsuite (.xml) |
X |
X |
|
FabTrol Kiss (.kss) |
Datos de modelo, atributos |
|
|
FabTrol MIS Xml (.xml) |
X |
X |
|
Filmbox (.fbx) |
X |
|
|
GL Transmission Format (.glft) |
X |
|
|
High Level Interface File (.hli) |
X |
X |
|
HMS (.sot) |
Cantidades de elementos y materiales, geometría de producción para colada, ploteo y corte, estado y notas de diseño |
|
|
IBB Betsy (.fa, .f, .ev) |
Cantidades de elementos y materiales |
|
|
IFC2x2 (.ifc) ** |
X |
|
|
IFC2x3 (.ifc) ** |
Modelo BIM, geometría 3D, geometría 2D, atributos |
Modelo BIM, geometría 3D, geometría 2D, atributos |
|
IFC4 (.ifc) ** |
X |
X |
|
IFCXML 2X3 (.ifcXML) ** |
X |
X |
|
IFCZIP 2x3 (.ifcZIP) ** |
X |
X |
|
Initial Graphics Exchange Specification (IGES) (.iges,.igs) |
X |
X |
|
LandXML (.xml) |
X |
|
|
Microsoft Project (.xml) |
X |
X |
|
Microstation (.dgn) |
Geometría 3D |
Geometría 3D |
|
Oracle Primavera P6 (.xml) |
X |
X |
|
Plant Design Management System (.pdms) |
X |
|
|
Polygon File Format (.ply) |
X |
|
|
SAP, Oracle, ODBC, etc. |
X * |
X * |
|
SketchUp (.skp) |
Geometría 3D |
Geometría 3D |
|
Staad ASCII (.std) |
X |
X |
|
Steel Detailing Neutral Format (.sdf,.sdnf, .dat) |
Geometría 3D |
Geometría 3D |
|
Steel12000 |
X |
|
|
STEP AP203 (.stp,.step) |
Geometría 3D |
|
|
STEP AP214 (.stp,.step) |
Geometría 3D |
Geometría 3D |
|
StruM.I.S |
X |
Geometría 3D, geometría 2D, dibujos |
|
Tekla Collaboration (.tczip) |
X |
X |
| Tekla EPM (por ejemplo, Fabsuite) | Datos de modelo, atributos, dibujos, archivos CN | |
|
Tekla-FabTrol Report (.xsr) |
X |
|
|
Tekla Structural Designer neutro (.cxl) |
Modelo Análisis y Diseño |
Modelo Análisis y Diseño |
|
Tekla Structures forma (.tsc) |
X |
X |
|
Trimble Field Link (.tfl) |
X |
X |
|
Trimble LM80 (.txt,.cnx) |
X |
X |
|
TubeNC (.xml) |
Geometría de parte para fabricación |
|
|
Unitechnik (.uni, .cam) |
Cantidades de elementos y materiales, información de proceso, geometría de producción para encofrado prefabricado, ploteo, soldadura de malla |
* Se usa Tekla OpenAPI
** Para obtener una lista de aplicaciones IFC con certificación de buildingSMART international, consulte Software Certificado.
Software de Trimble compatible
La siguiente tabla muestra el software de Trimble compatible con Tekla Structures.
|
Producto de Trimble |
Importar a Tekla Structures |
Exportar desde Tekla Structures |
|---|---|---|
|
3D+ |
Autodesk (.dwg) Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
DuctDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
PipeDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
Plancal |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
|
SketchUp Make |
SketchUp (.skp) |
SketchUp (.skp) |
|
SketchUp Pro |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
|
Tekla Field3D |
IFC2X3 (.ifc) |
|
|
Tekla Civil |
Enlace Directo LandXML (.xml) |
Enlace Directo IFC2X3 (.ifc) |
|
Tekla Collaboration |
Archivos de Tekla Collaboration (.tczip) |
Archivos de Tekla Collaboration (.tczip) |
|
Tekla Structural Designer |
XML neutro (.cxl) |
XML neutro (.cxl) |
|
Trimble Business Centre |
LandXML (.xml) |
|
|
Trimble Connect |
Enlace Directo IFC2X3 (.ifc) |
Enlace Directo IFC2X3 (.ifc) |
|
Trimble Field Link |
Trimble Field Link (.tfl) |
Trimble Field Link (.tfl) |
|
Trimble LM80 Desktop |
Autodesk (.dxf) LM80 (.cnx, .txt) |
Autodesk (.dxf) LM80 (.cnx, .txt) |
|
Vico Office |
Enlace Directo |
|
|
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
||
|
IfcXML 2X3 (.xml) |
IfcXML 2X3 (.xml) |
|
|
Microstation (.dgn) |
||
|
Hoja de cálculo Excel (.xls) |
Hoja de cálculo Excel (.xls) |
|
|
Vico Schedule Planner |
Enlace Directo .xml |
Enlace Directo .xml |
Software compatible con enlace directo
En la tabla siguiente se muestra el software que tiene un enlace directo con Tekla Structures para importar y exportar datos.
Hay disponibles varios enlaces directos en Tekla Warehouse.
El cuadro también enumera los formatos de archivo que se pueden usar en caso de que el enlace directo no sea posible.
|
Producto |
Empresa |
Importar a Tekla Structures |
Exportar desde Tekla Structures |
|---|---|---|---|
|
ADConX |
ADConX |
Enlace Directo |
|
|
AxisVM |
Inter-CAD Kft. |
Enlace Directo |
Enlace Directo IFC2X3 (.ifc) |
|
BeamMaster |
AGT |
Enlace Directo |
|
|
Bentley Architecture |
Bentley |
Enlace Directo (ISM) |
Enlace Directo (ISM) |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Bentley Structural |
Bentley |
Enlace Directo (ISM) |
Enlace Directo (ISM) |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
|||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
BricsCAD |
Bricsys |
.ifc |
.ifc |
|
CYPECAD |
Cype |
Enlace Directo |
|
|
Diamonds |
Buildsoft |
Enlace Directo |
Enlace Directo |
|
Fabsuite |
Fabsuite |
Enlace Directo KISS (.kss) |
Enlace Directo KISS (.kss) |
|
FEM Design |
StruSoft |
Enlace Directo IFC2X3 (.ifc) |
Enlace Directo IFC2X3 (.ifc) |
|
IDEA StatiCa |
IDEA StatiCa |
Enlace Directo |
|
|
Joints For Tekla |
Progetto Archimede |
Enlace Directo |
|
|
Lantek |
Lantek |
Enlace Directo |
Enlace Directo |
|
LIRA-SAPR |
LIRA SAPR |
Enlace Directo (Default, Rusia) |
Enlace Directo (Default, Rusia) |
|
LIRA 10 |
LIRA SOFT |
Enlace Directo (Rusia) |
Enlace Directo (Rusia) |
|
Meridian Prolog |
Trimble |
Enlace Directo |
|
|
Midas Gen |
MIDAS |
Enlace Directo |
Enlace Directo |
|
ModeSt |
Tecnisoft |
Enlace Directo |
Enlace Directo |
|
PEMA WeldControl |
Pemamek |
Enlace Directo |
|
|
Pipelabo |
Maruhide |
Enlace Directo |
|
|
PowerConnect |
Buildsoft |
Enlace Directo |
Enlace Directo |
|
PowerFrame |
Buildsoft |
Enlace Directo |
Enlace Directo |
|
ProCAM |
HGG |
Enlace Directo |
Enlace Directo |
|
Pro-Fit |
Zeman |
Enlace Directo |
|
|
Qnect |
Qnect |
Enlace Directo |
|
|
Raptor |
Peddinghaus |
Enlace Directo |
|
|
RFEM |
Dlubal |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) IFC2X3 (.ifc) |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) IFC2X3 (.ifc) |
|
RISA 3D (Suite) |
Risa Technology |
Enlace Directo (mercado norteamericano) |
Enlace Directo (mercado norteamericano) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
RisaConnection |
Risa Technology |
Enlace Directo (EE. UU., Reino Unido, Alemania, Suecia, Noruega, China, India, Australia) |
Enlace Directo (EE. UU., Reino Unido, Alemania, Suecia, Noruega, China, India, Australia) |
|
Robot Millenium |
Autodesk |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) CIS/2 LPM6 diseño (.stp, .p21, .step) |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) CIS/2 LPM6 diseño (.stp, .p21, .step) |
|
RSTAB |
Dlubal |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) IFC2X3 (.ifc) |
Enlace Directo CIS/2 LPM6 análisis (.stp, .p21, .step) IFC2X3 (.ifc) |
|
SAP2000 |
Computers & Structures, Inc. |
Enlace Directo |
Enlace Directo |
|
Enlace Directo (ISM) |
Enlace Directo (ISM) |
||
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
SCIA |
Nemetschek |
Enlace Directo |
Enlace Directo |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
S-FRAME |
S-FRAME Software Inc. |
Enlace Directo Autodesk (.dxf) |
Enlace Directo Autodesk (.dxf) |
|
Sicam |
Controlled Automation |
Enlace Directo |
|
|
STAAD.Pro |
Bentley |
Enlace Directo |
Enlace Directo |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
Archivo Staad ASCII (.std) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
ISM |
ISM |
||
|
Steel Projects PLM |
Steel Projects |
Enlace Directo |
Enlace Directo |
|
StruM.I.S |
StruM.I.S |
Enlace Directo |
BSWX (.bswx ) |
|
Vacam |
Voortman |
Enlace Directo |
Software compatible
En la tabla siguiente, se muestra una lista de software compatible con Tekla Structures, así como los formatos que se pueden importar y exportar en Tekla Structures.
Para obtener una lista de aplicaciones IFC con certificación de buildingSMART international, consulte Software Certificado.
Para obtener más información sobre las distintas herramientas de importación y exportación, consulte Importación y exportación en Tekla Structures.
|
Producto |
Empresa |
Importar a Tekla Structures |
Exportar desde Tekla Structures |
|---|---|---|---|
|
3ds Max |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
|
3ds Max Design/VIZ |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
| A+ Software | ArmaPlus |
BVBS (.abs) Soulé (.xml) aSa (.TEK) |
|
|
Adapt |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Advanced Steel, Advanced Design/Engineering |
Autodesk |
CIS/2 LPM5 análísis (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
CIS/2 LPM5 análísis (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
Allplan/Planbar |
Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
ANSYS |
ANSYS |
IGES (.iges, .igs) |
IGES (.iges, .igs) |
|
ArchiCAD |
Graphisoft / Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
|
IFCZIP (.ifczip) |
IFCZIP (.ifczip) |
||
|
Coordinated view v1 |
Coordinated view v1 |
||
|
ArchonCAD |
ArchonCAD Ltd. |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Armaor |
Ariadis |
BVBS (.abs) |
|
|
Artube |
Adige |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
|
aSa Rebar |
Applied Systems Associates Inc |
Archivo aSa Rebar (.TEK) |
|
|
ASI |
Applied Science International LLC |
Archivo Staad ASCII (.std) |
|
|
AutoCAD |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
AutoCAD Architecture |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IGES (.iges, .igs) |
Microstation (.dgn) |
||
|
AutoCAD Civil 3D |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
Microstation (.dgn) |
|||
|
Archivos LandXML (.xml) |
|||
|
AutoCAD MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
|||
|
AutoPLANT |
Bentley |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
AutoVue |
Oracle |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) STEP AP214 (.stp,.step) |
|
|
Aveva E3D |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Archivos de Tekla Collaboration basados en .ifc(.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Archivos de Tekla Collaboration basados en .ifc(.tczip) |
|
AviCAD |
Progress/EBAWE |
Unitechnik (.cam), BVBS (.abs) |
|
|
Bentley Building Electrical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Bentley Building Mechanical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Bentley Inroads |
Bentley |
Archivos LandXML (.xml) |
|
|
Betsy |
IBB – Consultants & Engineers |
Betsy (.fa), Betsy (.f), Betsy (.ev) |
|
|
Cadmatic |
Cadmatic |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
CADmep+ |
MAP Software / Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
|
IFCZip (.ifczip) |
IFCZip (.ifczip) |
||
|
CADPipe |
AEC Design Group |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
CADWorx Plant |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
CAESAR II |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
CATIA |
Dassault |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
IGES (.iges, .igs) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Concrete Pro |
LAP Laser GmbH |
Autodesk (.dwg) Autodesk (.dxf) Unitechnik (.cam) |
|
|
ConSteel |
ConSteel Solutions Limited |
ASCII |
|
|
Corobs |
Müller Opladen |
TubeNC (.xml) |
|
|
Daystar Software |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
DDS-CAD |
DDS |
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
|
Digital Project |
Gehry Technologies |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
ebos |
Progress/EBAWE |
Unitechnik (.cam) |
|
|
elcoCAD |
Hannappel SOFTWAR E GmbH |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
ELiPLAN |
Elematic |
ELiPLAN ( |
ELiPLAN (.eli) |
|
ELiPOS |
Elematic |
ELiPLAN (.eli) |
|
|
EliteCAD |
Messerli Informatik |
IFC2X3 (.ifc) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dxf) |
|
ETABS |
Computers &Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP214 (.stp,.step) |
|||
|
FabPro Pipe |
UHP Process Piping Inc. |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
MRP de FabTrol |
FabTrol |
FabTrol MIS XML (.xml) |
FabTrol MIS XML (.xml) FabTrol KISS File (.kss) Tekla-FabTrol Report (.xsr) |
|
FactoryCAD |
Siemens |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
FelixCAD |
SofTec |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Floor Pro |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
FormZ |
AutoDesSys, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
FXTube |
Mazak |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
|
GSA |
Oasys |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
|
GT Strudl |
GT Strudl |
Autodesk (.dxf) CIS/2 LPM6 análisis (.stp, .p21, .step) |
Autodesk (.dxf) |
|
HMS |
HMS |
HMS (.sot) |
|
|
HOOPS |
Tech Soft 3D |
Autodesk (.dwg) Autodesk (.dxf) |
|
|
Inventor |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
IronCAD |
IronCAD |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
iTWO |
RIB Software AG |
CPIxml (.xml) |
|
|
KeyCreator |
Kubotek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
LEIT2000 |
SAA |
Unitechnik (.cam) |
|
|
LP-System |
Lennerts & Partner |
BVBS (.abs) |
|
|
MagiCAD |
Progman |
Autodesk (.dwg) IFC2X3 (.ifc) |
Autodesk (.dwg) IFC2X3 (.ifc) |
|
MasterFrame |
MasterSeries |
DSTV96 (.nc, .stp, .mis) |
DSTV96 (.nc, .stp, .mis) |
|
Maxon Cinema 4D |
Nemetschek |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Maya |
Autodesk |
Autodesk (.dxf) IGES (.iges, .igs) |
STEP AP214 (.stp,.step) Autodesk Maya Autodesk (.dxf) |
|
Mesh Welding |
EVG (Filzmoser) |
Unitechnik (.cam) BVBS (.abs) |
|
|
Mesh Welding |
A.W.M. |
Unitechnik (.cam) |
|
|
Mesh Welding |
Progress / EBAWE |
Unitechnik (.cam) |
|
|
Microsoft Office Project |
Microsoft |
Project (.xml) |
Project (.xml) |
|
Microstran |
Engineering Systems Pty Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Microstation |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
IGES (.iges, .igs) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Multiframe |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
Nastran |
MSC Software Corporation |
Autodesk (.dwg) IGES (.iges, .igs) |
Autodesk (.dwg) IGES (.iges, .igs) |
|
NavisWorks |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) CIS/2 LPM6 análisis (.stp, .p21, .step) IFC2X3 (.ifc) Microstation (.dgn) |
|
|
NX (Unigraph) |
Siemens |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
PDMS |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Archivos de Tekla Collaboration (.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) Archivos de Tekla Collaboration (.tczip) |
|
PDS |
Intergraph / Hexagon |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
|
Peikko Designer |
Peikko Group Corporation |
Plug-ins |
Plug-ins |
|
PipeCAD |
Mc4 Software |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Plant-4D |
CEA Technology |
Autodesk (.dwg) Autodesk (.dxf) Microstation (.dgn) |
|
|
PRIAMOS |
GTSdata |
CPIxml (.xml) Unitechnik (.cam) |
|
|
Primavera |
Oracle |
P6 (.xml) |
P6 (.xml) |
|
ProStructures |
Bentley |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
Microstation (.dgn) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
ISM |
ISM |
||
|
Pro/Engineer |
PTC |
IGES (.iges, .igs) STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
|
ProFit |
Progress/EBAWE |
BVBS (.abs) |
|
|
Prokon |
Prokon |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
|
PythonX |
Lincoln Electric |
DSTV |
|
|
RAM (CAD Studio) |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
ISM |
ISM |
||
|
Revit Architecture/MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Archivos de Tekla Collaboration (.tczip) |
|||
|
Revit Structure |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Archivos de Tekla Collaboration (.tczip) |
|||
|
Rhinoceros |
McNeel North America |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Enlace de Geometry Gym |
Enlace de Geometry Gym |
||
|
RinasWeld |
Kranendonk |
IFC2X3 (.ifc) | |
|
SACS |
Engineering Dynamics Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdnf) |
|
|
SAFE |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
IGES (.iges, .igs) |
|||
|
SAM |
Bestech Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Software Schnell |
Software Schnell |
BVBS (.abs) Unitechnik (armadura/malla) |
|
|
SDS/2 |
Design Data |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
||
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
CIS/2 LPM6 fabricación (.stp,.p21,.step) |
|||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Smart 3D (SmartPlant / SmartMarine) |
Intergraph / Hexagon |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
|
CIS/2 LPM6 diseño (.stp, .p21, .step) |
CIS/2 LPM6 diseño (.stp, .p21, .step) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
IFC2X3 (.ifc), con SmartPlant 3D |
|||
|
Solibri Model Checker/Model Viewer |
Solibri |
IFC2X3 (.ifc) |
|
|
SolidEdge |
Siemens |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
SolidWorks |
Dassault |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Soulé |
Soulé Software Inc. |
.xml BVBS (.abs) |
|
|
SPACE GASS |
SPACE GASS |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
CIS/2 LPM6 análisis (.stp, .p21, .step) |
|
SpaceClaim |
SpaceClaim Co. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
Steel Smart System |
Applied Science International, LLC |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
StructureWorks |
StructureWorks LLC. |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
TurboCAD |
IMSI Design |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
|
UniCAM |
Unitechnik |
Unitechnik (.cam, .uni) |
|
|
Unigraphics |
Siemens PLM Software |
IGES (.iges, .igs) |
|
|
Vernon |
Lincoln Electric |
TubeNC (.xml) |
|
|
VectorWorks |
Nemetschek |
IFC2X3 (.ifc) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
Volo View |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |