Review slab and mat design

Review slab and mat design status

Open a 2D view at the level of the slab or mat and activate a Review View by clicking Review View in the Status bar.
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
In the Slab/Mat Design group on the ribbon, click Status.

In the same group, click the drop list to display the filtering options.


Filter	Description
Overall	The governing Top X, Top Y, Bottom X, Bottom Y, or span depth result is displayed.
Reinforcement	The governing Top X, Top Y, Bottom X, or Bottom Y result is displayed.
Top X	The result is only displayed for top reinforcement in the X direction.
Top Y	The result is only displayed for top reinforcement in the Y direction.
Bottom X	The result is only displayed for bottom reinforcement in the X direction.
Bottom Y	The result is only displayed for bottom reinforcement in the Y direction.
Span Depth	The span to depth result is displayed.
Bearing Pressure	The bearing pressure result is displayed.

Select the filtering option you require.

Color codes display the design status of each slab and mat for the selected filtering option.

Tekla Structural Designer uses the following classifications:


Status	Description
Error	The slab item currently cannot be designed because an error has occurred.
Beyond Scope	The slab item cannot be designed because its design is beyond the scope of Tekla Structural Designer.
Fail	The slab item has failed one or more design checks.
Warning	Although the slab item has passed the design checks, one or more warnings have been issued. Review the warnings before deciding if you need to take further action.
Pass	The slab item has passed all design checks.
Not Yet Designed	The slab item has not been designed.

Open a 2D view at the level of the slab or mat and activate a Review View by clicking Review View in the Status bar.
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
In the Slab/Mat Design group on the ribbon, click Ratio.

In the same group, click the drop list to display the filtering options.


Filter	Description
Overall	The governing Top X, Top Y, Bottom X, Bottom Y, or span depth result is displayed.
Reinforcement	The governing Top X, Top Y, Bottom X, or Bottom Y result is displayed.
Top X	The result is only displayed for top reinforcement in the X direction.
Top Y	The result is only displayed for top reinforcement in the Y direction.
Bottom X	The result is only displayed for bottom reinforcement in the X direction.
Bottom Y	The result is only displayed for bottom reinforcement in the Y direction.
Span Depth	The span to depth result is displayed.
Bearing Pressure	The bearing pressure result is displayed.

Select the filtering option you require.

Color codes display the design ratio of each slab item for the selected filtering option. N/A is assigned to members that have no ratio or whose ratio is smaller than the lowest band. N/A also indicates slab items that are either beyond scope or have yet to be designed.

Note: In order to see punching check status you must first switch off Slab Items and Slab Patches in Scene Content.

Open a 2D view at the level of the slab or mat and activate a Review View by clicking Review View in the Status bar.
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
In the Slab/Mat Design group on the ribbon, click Status.
Color codes display the design status of each punching check.

Note: In order to see punching check ratio you must first switch off Slab Items and Slab Patches in Scene Content.

Open a 2D view at the level of the slab or mat and activate a Review View by clicking Review View in the Status bar.
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
In the Slab/Mat Design group on the ribbon, click Ratio.
Color codes display the design ratio of each punching check.