Review foundation and pile design
Review foundation or pile status
- Activate a Review View by clicking Review View in the Status bar.
-
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
-
Either in the Foundations group or the Piles group of the ribbon, click Status.
Color codes display the design status of each foundation or pile using the following classifications:
Status
Description
Error The foundation or pile currently cannot be designed because an error has occurred.
Beyond Scope The foundation or pile cannot be designed because its design is beyond the scope of Tekla Structural Designer.
Fail The foundation or pile has failed one or more design checks.
Warning Although the foundation or pile has passed the design checks, one or more warnings have been issued. Review the warnings before deciding if you need to take further action.
Pass The foundation or pile has passed all design checks.
Not Yet Designed The foundation or pile has not been designed.
Review foundation or pile ratios
- Activate a Review View by clicking Review View in the Status bar.
-
On the Review ribbon, in the Type list, select the desired design type to review.
- Static
- RSA
- Combined (i.e. Static and RSA together)
-
Either in the Foundations group or the Piles group of the ribbon, click Ratio.
Color codes display the design ratio of each foundation or pile. N/A is assigned to members that have no ratio or whose ratio is smaller than the lowest band. N/A also indicates foundations and piles that are either beyond scope or have yet to be designed.